Ultra high pressure cleaning machineGenerally, there are two types: hot water and cold water. However, the pressure of the hot water ultra-high pressure cleaning machine we commonly use is not higher than 250 bar. Hot water ultra-high pressure cleaning machines are mainly used to clean difficult to clean dirt. Hot water ultra-high pressure cleaning machines use expansion tubes for heating. When water passes through the expansion tube, the pressure of the expansion tube will be relatively high. If the bearing capacity of the expansion tube does not increase, the pressure of the hot water ultra-high pressure cleaning machine will not increase. But if the pressure on the expansion tube increases, the cost will also increase. So hot waterUltra high pressure cleaning machineThe working pressure will be around 200BAR. When high pressure is required, a high-pressure cold water cleaning machine is usually used to achieve the cleaning effect based on its working pressure. When cleaning oil stains and various stubborn stains, a hot water ultra-high pressure cleaning machine or a saturated steam cleaning machine is needed.

During the use of ultra-high pressure cleaning machines, malfunctions are inevitable. When problems arise, the cause should be carefully investigated based on different fault phenomena.

1) The spray gun does not spray water

a) The inlet and inlet filter are blocked. b) The nozzle is blocked. c) If the heating spiral tube is blocked, remove the scale if necessary.

2) Unstable outlet pressure

a) Insufficient water supply. b) The air is sucked into the pipeline due to reasons such as pipeline rupture and the cleaning agent nozzle not being inserted into the cleaning agent. c) The nozzle is worn out. d) The high-pressure water pump seal is leaking water.

3) Burner does not ignite and burns

a) Insufficient air intake, emitting white smoke. b) The fuel filter, fuel pump, and fuel nozzle are dirty and blocked. d) The solenoid valve is damaged. e) The position of the ignition electrode has changed, and the spark is too weak. f) The high-voltage ignition coil is damaged. g) Pressure switch damaged.

high temperatureUltra high pressure cleaning machineIf the above problems occur, users can search for the cause and troubleshoot on their own. But if the cleaning machine has serious faults such as pump body leakage or crankcase leakage, it should be sent to a professional maintenance department with complete accessories and strong technical strength for repair to avoid unnecessary economic losses.

Scope of application of ultra-high pressure cleaning machine

1. Cleaning and maintenance of various motor vehicles, engineering vehicles, construction machinery, and agricultural machinery supporting products, such as washing cars, bulldozers, concrete mixers, tractors, etc. It is an ideal cleaning tool for individuals and small vehicle maintenance units to clean cars and motorcycles. Equipment maintenance, oil pollution cleaning

Equipment maintenance, oil pollution cleaning

2. Cleaning the exterior walls, floors, bathhouses, and swimming pools of buildings is particularly effective for doors, windows, floors, toilets, oil stains, and corners that are difficult to clean manually.

3. Disinfection and cleaning of food processing plants, food processing machinery, and kitchens in hotels and restaurants.

4. Ultra high pressure cleaning machines with a pressure exceeding 500 bar can perform concrete chiseling and higher pressure cleaningUltra high pressure cleaning machineIt can even cut and chisel off concrete of various grades.

Ultra high pressure cleaning machine uses water as the working medium. Usually, the power driven pump completes a suction and discharge process on the water, converting ordinary water into high-pressure and low flow rate water, and then delivering it to the high-pressure pipeline to reach the high-pressure nozzle with a certain amount of energy. The aperture of the high-pressure nozzle is much smaller than the diameter of the high-pressure pipeline, so the water reaching the high-pressure nozzle must accelerate in order to pass through the nozzle.

With the technological development of ultra-high pressure cleaning machines, their use has become increasingly widespread. In modern urban construction, dredging sewage pipes has always been a major challenge. Due to the frequent dumping of sewage and other debris by residents, as well as cement and sand slurry on construction sites, these debris often settle and accumulate in the sewage pipes. Excessive sedimentation can cause pipeline blockage. If not cleaned and dredged in a timely manner, it can lead to sewage overflow, environmental pollution, economic losses, and inconvenience to residents' lives.

At present, the ultra-high pressure cleaning machine is the fastest developing new type of cleaning equipment. It uses water to generate high pressure through a high-pressure water generating device, and then forms a high-pressure water jet through the action of a nozzle,Ultra high pressure cleaning machineUtilize the powerful force of water flow to achieve the effect of cleaning, cutting, and crushing items. In terms of cleaning technology, new cleaning methods, techniques, and equipment are constantly emerging. The proportion of physical cleaning in the cleaning market is increasing.