ZJC turbine oil filter

TR/ZJCThe turbine oil vacuum oil purifier adopts aggregation and separation technology to process lubricating oil online for steam turbines, gas turbines, water turbines, and lubricating oil compressors in various industries, ensuring the normal operation of the unit regulation and lubrication system. It can also be used for bottom viscosity adjustment and cooling oil treatment, mainly used for lubricating oil treatment of generator sets, and can also be applied to hydraulic oil, refrigeration oil, and other low viscosity lubricating oils that require removal of a large amount of moisture and precise filtration of impurities.

Product Features

1This product utilizes high molecular weight polymer materials and does not use any additives to break emulsions.

2This machine adopts the ternary one-time dehydration method and advanced enhanced hydrophilic and flowing water principles, dehydrating and removing liquid water, as well as free water and dissolved water.

3The sophisticated filtration system adopts a technology that combines double mesh filtration with polymer adsorption materials, resulting in a large amount of pollutants.

4The primary filter is made of imported stainless steel mesh, which can be repeatedly cleaned and used, greatly reducing the operating cost of the equipment; The precision filter adopts a polymer filter imported from the United States, which has high accuracy and can effectively remove fine particles and impurities in the oil. Corrosion resistance, high temperature resistance, good mechanical strength, high impurity removal accuracy, and long service life.

5The heating system adopts optimized pipeline design to ensure no dead oil zone and prevent dry burning.

6It can achieve unmanned online operation with equipment such as steam turbines and water turbines, with low noise and meeting the world's high environmental standards.

7This machine adopts strong wind cooling condensation technology, which avoids the re emulsification pollution of vacuum pump oil and extends the service life of the vacuum pump.

8Humanized design, the infrared liquid level control system replaces traditional manual or float valve control. Infrared control has high sensitivity and can effectively control oil leakage while avoiding the occurrence of oil leakage.

9And the equipment control is equipped with phase sequence protection, overpressure alarm shutdown, electrical automatic protection control system, and temperature constant automatic control system. And heating and temperature control are3Chain protection:1The heater is also interlocked with the oil pump and vacuum pump, and can only work when the oil pump and vacuum pump are running;2The heater only operates when the oil temperature is below the set temperature60-70Work only under certain circumstances;3If the heating temperature exceeds the set temperature, the ultra-high temperature setting protector will activate and stop heating. And the electrical components used in the equipment are all flame-retardant, so our equipment eliminates the safety hazards caused by the failure of the temperature controller..

Advantage:

1.This series of products integrates vacuum drying, separation engineering technology, coagulation technology, and secret filtration technology for adsorption.

2.It can automatically drain without stopping the machine, so that the waste oil meets the standards for using new oil.