ZJD-F Aggregation Separation Light Oil Fuel Dehydration Filter

TR/ZJD-FAgglomeration separation type light lubricating oil filter

Excellent Potential:This machine integrates precision filtration, demulsification, and dehydration, and can remove a large amount of water without heating. It can quickly separate light oil that is half oil and half water; Mechanical impurities in oil can be filtered and purifiedNAS8Reference standards at or below level; Cart style design, easy to use, suitable for light oils with high moisture content (ordinary diesel, gasoline, kerosene, low viscosity)46#And below turbine oil or hydraulic oil, etc.

special Point:

1. This model of oil filter adopts a specially designed oil-water separation filter,No heating is required, ensuring that the additives in the oil do not crack or deteriorate, and the quality of the dehydrated oil can be guaranteed. The filtration dehydration device must use filtration+Agglomeration separation type, without additional operations such as heating or vacuuming, ensuring the quality of oil products.
2. Easy to operate, capable of automatic online water discharge without the need for human supervision.
3. working principle:Unqualified oil first enters the primary filtration, where large particle impurities are intercepted. The oil with large particle impurities removed is then transported to the fine filter by the oil pump. After removing smaller impurities in the fine filter, it continues to enter the coalescence separator, where the principle of molecular separation technology is used to perform pressure swing analysis on the oil and eliminate intermolecular binding forces,Dissolve water, free water, and rapidly break the oil film in the oil to detach from the oil molecules and precipitate; At this point, dehydration and impurity removal are completed to meet the required moisture and cleanliness requirements.
4. The automatic control protection system consists of sensors, motors, protective components, and other components.The factory pressure protection control point of the pressure controller is set to0.6MpaAfter the work pressure reaches the set point, the whole machine will sound an alarm and stop working to prevent accidents from happening.
5. The layout of various components in the filtration and dehydration device is reasonable, making maintenance, daily upkeep, and replacement of filter cartridges convenient.

Equipment Technical Parameters