The rotary grid cleaning machine has a rake chain similar to the grid according to the direction of water flow. The clearance between the rake teeth assembled on the rake chain shaft can be selected according to the usage conditions. When the rake teeth separate solid suspended solids in the fluid, it can ensure smooth flow of water. The entire work process can be continuous or intermittent.

installation and debugging

1. The lifting of the rotary grille machine must be carried out by hanging the top plate hole or lower foot lifting ring of the box with steel wire rope.

2. Installation position: The bottom foot of the rotary grille must be flush with the bottom surface, and the front end of the equipment should be basically flush with the front end face of the groove.

3. Pour cement mortar into the anchor bolts, wait for the cement to solidify, and then tighten the nuts.

4. Before starting up, the front of the rotary grille should be free of large stones or other coarse debris. If there are any, they should be removed before starting up.

5. Operation

(1) Check if all components are loose before operation.

(2) Remove the motor cover and rotate the fan by hand. The entire machine should run smoothly and flexibly.

(3) Lubricate the sprocket and chain with lubricating oil.

(4) Jog the electric motor, visually check if the direction of operation is correct, start the motor, check if the electrical action is normal and reliable, and if the working current is normal.

(5) During operation, all components should rotate flexibly without any jamming or abnormal sounds.

6. The rotary grille utilizes elastic devices as overload protection. Adjust the proximity position of the switch before use.