HBZhan Content Introduction:Mechanical grid cleaning machineIt is a water treatment equipment that can continuously and automatically remove various shapes of debris from fluids. Mechanical grid cleaning machines can be widely used in urban sewage treatment, water supply industry, and power plant inlets. Mechanical grid cleaning machines can also be used as front-end screening equipment in wastewater treatment processes in industries such as textiles, food processing, papermaking, and leather. Mechanical grid cleaning machines are currently one of the solid-liquid screening equipment in China.
　　
feature
　　
The mechanical grid cleaning machine has a high degree of automation and separation efficiency, and can ensure continuous and stable operation without supervision;
　　
Mechanical grille cleaning machine has low power consumption, no noise, and good corrosion resistance;
　　
The mechanical grille decontamination machine body is equipped with a mechanical overload safety protection device. In the event of equipment failure, the shear pin can be cut off to avoid overloading the equipment and damaging its components;
　　
The mechanical grid cleaning machine can adjust the operating interval of the equipment arbitrarily to achieve periodic operation;
　　
The mechanical grid cleaning machine can automatically control the start and stop of the equipment based on the liquid level difference before and after the grid; And it has manual control function for easy maintenance.
　　
Principle Analysis
　　
The mechanical grid cleaning machine is assembled into a set of rotating grid chains by a type of rake teeth. Under the drive of the motor reducer, the rake chain rotates in the opposite direction of the water flow, salvaging the floating debris on the water surface. When the rake chain is transported to the upper part of the equipment, due to the guidance of the groove wheel and curved rail, relative self-cleaning motion occurs between each set of rake teeth, and the vast majority of solid matter falls down by gravity. The other part relies on the reverse movement of the cleaner to clean up the debris stuck to the rake teeth.
　　
The mechanical grid cleaning machine has a rake chain similar to the grid according to the direction of water flow. The clearance between the rake teeth assembled on the rake chain shaft can be selected according to the usage conditions. When the rake teeth separate solid suspended solids in the fluid, it can ensure smooth flow of water. The entire work process can be continuous or intermittent.