Submersible cycloidal thrusterIt is a special diving power equipment based on cycloidal pinwheel transmission technology, which plays an important role in sewage treatment, water circulation, landscape water purification and other fields with high transmission efficiency, stable output torque, low operating noise, and easy installation and maintenance. It is particularly suitable for fluid transportation and mixing scenarios that require low speed and high thrust. ​

Cycloid transmission technology brings efficient and stable performance. The core transmission component of the impeller adopts a cycloidal pinwheel reducer, which efficiently transmits the motor power to the impeller through the meshing transmission of the cycloidal and pinwheel. The transmission efficiency can reach over 95%, far higher than traditional gear transmission. Its output torque is uniform without pulsation, which can achieve smooth flow and avoid equipment vibration and energy waste caused by torque fluctuations. In the secondary sedimentation tank distribution channel of the sewage treatment plant, the submersible cycloidal thruster can provide stable thrust to evenly distribute sewage to each sedimentation unit, ensuring consistent sedimentation effect; In the circulation of landscape lakes, smooth pushing can form orderly water flow, avoiding local eutrophication of water bodies. ​

Low noise and outstanding environmental friendliness. The meshing clearance of the cycloidal pinwheel transmission is small, the operation is smooth, and the operating noise can be controlled below 60 decibels, which is much lower than traditional propulsion equipment and suitable for noise sensitive scenarios. In the ponds near residential areas surrounding municipal sewage treatment plants, the impact of noise on residents' lives can be reduced; Low noise operation can better integrate into the surrounding environment in small-scale sewage treatment facilities such as hospitals and schools. In addition, the equipment adopts a fully sealed submersible design, which eliminates the risk of oil leakage and avoids secondary pollution to the water body, meeting environmental protection requirements. ​

Easy installation and maintenance, adaptable to flexible scenarios. The submersible cycloidal thruster is lightweight and can be installed in various ways such as hanging chain and flange, without the need for complex civil construction; Key components such as impellers and seals are easy to disassemble, and daily maintenance does not require removing the entire equipment from the water surface, greatly reducing operation and maintenance costs. According to different flow requirements, flexible adaptation can be achieved by changing the impeller diameter or adjusting the motor power, which can meet the usage needs from small landscape pools to large industrial wastewater treatment pools. Its excellent reliability and economy make it an ideal equipment in the field of fluid power transmission. ​