Online fluoride ion analyzer (IT-8100)

Measurement range: 0.00-20000PPM
-2000.0—2000.0mV
-10.0--110℃
Resolution: 0.01/0.1/1PPM
0.1mV
0.1℃
Accuracy: PPM: based on mV and ion electrode
mV：±0.01％±3Digit
Temp.：±0.1℃±1Digit
Display screen: Large LCD display with status and unit display
Temperature compensation: automatic temperature compensation, NTC30K\\PT1000
Manually set temperature compensation
Calibration mode: two-point/three-point calibration with drift value correction
Control method: two-point control, with any set lag value
Cleaning contact: 1-9 minutes user-defined
Signal output: Two isolated 4-20mA outputs, adjustable for corresponding settings
Ionic concentration/temperature measurement value, maximum load 500 Ω
Automatic cleaning: ON 0~9999 seconds \ \ OFF 0~999.9 hours User setting
Hole size: 138 * 138 * 110 (W * H * D) or wall mounted/hanging mounted, etc
Protection level: IP 65
Power supply: 100-240 ± 15% VAC, 50/60Hz

IT-8100 ion concentration transmitter has excellent performance/cost ratio. F+/NH4+/Ca2+/Cl - or other ion selective electrodes can be selected for measurement. With an IP65 weather protection rating, it is very suitable for standalone installation outdoors and in humid process environments, which can avoid monitoring interruptions and enhance safety. It has the ability to detect the strength of external environmental light sources and automatically turn on the screen backlight display, making it easy to operate even in dark environments. The host has dual sets of analog signal outputs that can simultaneously correspond to measured values and temperatures, which is very helpful for your PLC data management and monitoring. This weather resistant transmitter series with dimensions of 144x144mm includes models of pH/ORP, conductivity/specific resistance, dissolved oxygen, ion concentration, turbidity/suspended solids, and other equivalent sizes. The variety is complete and suitable for your systematic installation and operation.