The gas in the wire mesh demister can remove the entrained mist through the wire mesh pad of the demisterThe packing material is a gas-liquid separation device.

Function of wire mesh demister

The composition of the wire mesh demister device mainly includes a wire mesh grid, a fixed wire mesh support device, and a wire mesh. Often used in enterprise filters supported by various materials, the composition of the wire mesh is made up of metal or non-metal wires.

wire mesh demister

Wire mesh demisters are widely used in gas-liquid separation devices and can now be applied in industries such as petrochemicals, tower manufacturing, and pressure vessels.The wire mesh demister can not only filter out larger liquid droplets suspended in the airflow, but also filter out tiny liquid droplets.The non-metallic wire of the filler is made by twisting multiple strands of non-metallic fibers, or it can be a single strand non-metallic wire.

Installing a wire mesh demister at the top of the tower can separate liquid droplets carried by gas inside the tower,This can ensure mass transfer efficiency, reduce valuable material loss, and improve the operation of the compressor behind the tower;

Gas liquid separation mainly uses wire mesh demisters, which can also be used for air filters. If a demister is installed between the trays, it can not onlyEnsure the transmission efficiency of the tray, reduce the spacing between plates, and effectively remove 3-5 μ m droplets.

Production of wire mesh demister

　　The wire mesh demister can also serve as a buffer for various instruments in the instrument industry, used for electronic shielding to prevent radio wave interference in industries such as chemical, petroleum, light industry, medicine, metallurgy, machinery, and environmental protection.

The working principle of the screen demister is that once the fog or foam gas in the container is found to rise at a uniform speed, the foam can be stuck to the screen surface through the filter screen in the product. When the mist on the silk net spreads in the next step, it can separate the liquid and fall down when the mist becomes a larger liquid. This is mainly because the filaments used in this type of wire mesh are wet, combined with the capillary action on the filaments, and then integrating the tension and other elements of the liquid surface itself, which can remove the fog bubbles in the container.

Function of wire mesh demister

There is a high probability that the wire mesh demister can remove fog and foam, and the effectiveness of this separation device in removing fog and foam can reach over 99%, but a good gas velocity needs to be selected.

The wire mesh demister selects different materials according to different specifications, some of which are stainless steel, nickel alloy, titanium alloy, ultra duplex steel, while others are fibers such as glass fiber and cotton fiber. You can choose which material to make the product according to your needs.

Working principle of wire mesh demister

The wire mesh demister has a simple overall structure, small volume, high demister efficiency, low resistance, and light weight. The installation, operation, and maintenance of this liquid gas separation device are convenient and simple, making it the preferred choice for liquid gas separator equipment in industries such as chemical and environmental protection. The wire mesh demister is also beneficial for improving the production efficiency of the equipment. The separation device has a capture efficiency of 98% -99.8% for mist with a particle size of ≥ 3-5 μ m, while the pressure drop of gas passing through the demister is very small, only 250-500Pa.