6 cubic fiberglass cleaning solution tanktankwater jugThere are two types: vertical and horizontal, and the specifications and models can be customized. It consists of a corrosion-resistant inner lining layer with resin content, an anti-seepage layer, a fiber winding reinforcement layer, and an outer surface layer. The working temperature is between -50 and 80 ℃, and the pressure resistance is generally below 6.4MPa, which has the advantages of pressure resistance, corrosion resistance, and long service life. And it has the characteristics of light weight, strength, anti-seepage, thermal insulation, edge, and smooth surface. It can be widely used in petroleum, chemical, textile, printing and dyeing, transportation, food brewing, synthetic engineering, water supply and drainage, seawater desalination, irrigation, etc. Storage of various corrosive media (such as acids, alkalis, salts, sewage, etc.), and can also be used as underground oil tanks, insulation storage tanks, transportation tankers, etc.

6 cubic fiberglass cleaning solution tank, storage tank, and water tankGood corrosion resistance, leakage prevention, and weather resistance; The corrosion resistance of fiberglass can withstand various acids, alkalis, salts, and organic solvents when storing corrosive media; Mechanical and physical properties possessed; Fiberglass winding molding reduces the occurrence rate of microcracks in fibers and achieves equal strength. This molding method can achieve a fiber content of up to 80, with a specific strength comparable to steel, cast iron, plastics, etc. The thermal expansion coefficient is roughly equivalent to steel, and the thermal conductivity coefficient is only 0.5 of steel; Long service life and maintenance costs.

6 cubic fiberglass cleaning solution tank, storage tank, and water tankFeatures:
1、 Physical properties: The specific gravity of fiberglass is usually 1.5~1.9g/cm3, which is 1/4~1/5 of steel. Compared to steel, cast iron, and plastic, the thermal expansion coefficient of fiberglass is roughly equivalent to that of steel, while its thermal conductivity coefficient is only 0.5
2、 Chemical corrosion resistance: By selecting different types of resins, it can withstand various acids, alkali salts, as well as various oils and solvents, and can be widely used in various aspects of chemical corrosion prevention, such as stainless steel and some precious metal materials
3、 The inner wall is smooth, with a roughness coefficient of n=0.0084. It has good hygiene performance, is easy to clean, and is resistant to microbial corrosion. If resin is used as the matrix, it is odorless and meets the hygiene requirements.
4、 According to requirements, it can be equipped with components such as liquid level gauges, guardrails, ladders, platforms, etc.