-
E-mail
fuhao@17Lp.com
-
Phone
18576673708
-
Address
Room 1402, Nan Guang Jie Jia Building, 3037 Shennan Middle Road, Futian District, Shenzhen, China
Product Categories
Shenzhen Xinlang Electronic Technology Co., Ltd
【 PMC35-1 DC Stabilized Power Supply 】 Japan Kikusui KIKUSUI Shenzhen Agent
NegotiableUpdate on 05/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
【 PMC35-1 DC Stabilized Power Supply 】 KIKUSUI Shenzhen Agent from Japan is a small power supply that uses a series regulator to achieve high stability and low noise output. This low-cost universal series condenses the functions of the PMC-A series and can be used in various fields, from research and development testing equipment to testing power supplies for mass production lines. According to the Z-output voltage (18V/35V), the product lineup includes a total of 6 models.
Product Details
【PMC35-1DC stabilized power supply: KIKUSUI Shenzhen agent from Japan is a small power supply that uses a series regulator to achieve high stability and low noise output. This low-cost universal series condenses the functions of the PMC-A series and can be used in various fields, from research and development testing equipment to testing power supplies for mass production lines. According to the maximum output voltage (18V/35V), the product lineup includes 6 models.
specialty
- Comes with output switch
The switch is a button switch with a locking mechanism, and when the output is OFF, the power supply becomes in a high impedance state. - The voltage and current setting knob adopts 10 transformations＊1
The output setting knob adopts a 10 turn winding type variable resistor, which can obtain stable output at high resolution. - Low cost popularization type
This is a universal power supply with simplified functions and cost-effectiveness. - External simulation remote control＊2
- Remote sensing function attached to the load end to stabilize the output voltage＊3
- Standard installation overvoltage protection function (OVP)
1: PMC has a voltage of 10 revolutions per minute and a current of 1 revolution per minute
* 2: Only applicable to PMC-A
* 3: Only applicable to PMC-A output rated 18V and 35V series models
lineup
| model | Specifications |
|---|---|
| PMC18-2 | 0 ? 18V／0 ? 2A |
| PMC18-3 | 0 ? 18V／0 ? 3A |
| PMC18-5 | 0 ? 18V／0 ? 5A |
| PMC35-1 | 0 ? 35V／0 ? 1A |
| PMC35-2 | 0 ? 35V／0 ? 2A |
| PMC35-3 | 0 ? 35V／0 ? 3A |
Specifications
* the following conditions are subject to the following unless otherwise
Net resistance load? Negative grounding? Remote sensing? After 30 minutes of warm up
| Shape name | output | Ripple | Power supply changes | |||
| CV | CC | CV | CC | CV | CC | |
| V | A | mVrms | mArms | mV | mA | |
| PMC18-2 | 0?18 | 0?2 | 0.5 | 1 | 1 | 10 |
| PMC18-3 | 0?3 | 0.5 | 1 | 1 | 10 | |
| PMC18-5 | 0?5 | 0.5 | 2 | 1 | 5 | |
| PMC35-1 | 0?35 | 0?1 | 0.5 | 1 | 3 | 10 |
| PMC35-2 | 0?2 | 0.5 | 1 | 3 | 10 | |
| PMC35-3 | 0?3 | 0.5 | 1 | 3 | 5 | |
| Shape name | Load variation | power supply | Consumption of electricity | appearance | quality | |
| CV | CC | communication | about | Type | about | |
| mV | mA | V±10% | VA | kg | ||
| PMC18-2 | 2 | 5 | 100 | 100 | I | 4 |
| PMC18-3 | 4 | 5 | 160 | I | 5 | |
| PMC18-5 | 5 | 10 | 230 | II | 6 | |
| PMC35-1 | 3 | 5 | 95 | I | 4 | |
| PMC35-2 | 3 | 5 | 190 | I | 5 | |
| PMC35-3 | 4 | 10 | 240 | II | 6 | |
Common Service
| Output voltage | 10 revolutions per minute variable | |
| Output voltage temperature coefficient 100 ppm／ ℃（TYP） | ||
| Transition response characteristic 50 μs | ||
| Output current | 1. Variable rotary linkage | |
| Temperature coefficient of output current 200 ppm／ ℃（TYP） | ||
| Meter indication (Green) LED） |
Output voltage indication error ± (0.5% rdng+2digit) at 23℃±5℃ （TYP ） Temperature coefficient 300ppm/℃ (TYP) |
|
| Output current indication error ± (1% rdng+5digit) at 23℃±5℃ （TYP ） Temperature coefficient 400ppm/℃ (TYP) | ||
| Voltmeter display | ||
| Zui Da represents the truss | Voltmeter 18V series: 19.99 35V series: September 1999 |
|
| Ammeter 9.99 | ||
| grounding | Grounding positive or negative terminals | |
| Action cycle temperature | 0? C. 40 degrees Celsius | |
| Action cycle humidity | 10%rh?80%rh （ However, it is not dew.) | |
| cooling method | Natural air cooling | |
| Grounding voltage | DC±250V | |
| Protection circuit | Is the setting range of output overvoltage protection (OVP) frozen at 5%? 105% | |
| Input Hughes / temperature Hughes | ||
| operation | In line operation (Number of possible connections=Grounding voltage ÷ Fixed output voltage, but for the same model) Example V In the case of 250 to 35 = 7.14 |
|
| Parallel operation? One control parallel operation | ||
| Dimensions zui Large | Type I：107W X 124 (134) H x 270 (290) DMM Type II：107W X 124 (134) h * 350 (370) DMM |
|
| Subsidiary products | Power cable, instruction manual, Hughes | |
Exterior dimensions
Position: mm
【PMC35-1DC stabilized power supply: Kikusui Shenzhen agent from Japan
【PMC35-1DC stabilized power supply: Kikusui Shenzhen agent from Japan
Similar Product Recommend
