0060D010BH4HC/- V Replacement for Hedeke Filter Cartridge

0060D010BH4HC/- V Replacement for Hedeke Filter CartridgeHuayu Production

In hydraulic systems, it is used to filter out solid particles and gel like substances in the working medium, effectively controlling the pollution level of the working medium. This series of substitute imported Hedeke filter cartridges is a domestically produced substitute product for foreign imported equipment filter cartridges, which can replace products from companies such as PALL, HYDAC, Hedeke, MANN, etc.

Performance indicators for substitute imported filter cartridges:

Filtering accuracy: 1-100 μ m

Working pressure (MAX): 21MPa

Working medium: general hydraulic, phosphate hydraulic oil, emulsion, water ethylene glycol

Working temperature: -30 ℃~+110 ℃

（2） Hedeke filter cartridge

1. Can quickly achieve and maintain the desired level of oil cleanliness in the system.

2. Can extend the service life of the oil.

3. Reduce bearing wear.

0060D010BH4HC/- V Replacement for Hedeke Filter CartridgeHuayu ProductionProduct Overview

This series of high-pressure oil filter cartridges are installed in the hydraulic system's oil circuit to remove metal powder and other mechanical impurities from the wear of various components in the hydraulic system, keeping the oil circuit clean and extending the service life of the hydraulic system. The low-pressure series filter element is also equipped with a bypass valve. When the filter element is not replaced in time, the bypass valve can automatically open to ensure the normal operation of the system. This series of products is a substitute for similar products in countries such as the United States, Germany, the United Kingdom, and Italy.

2. Application of Hedeke filter element

This series of filter cartridges is installed in the hydraulic system's oil circuit to remove metal powder and other mechanical impurities from the wear of various components in the hydraulic system, keeping the oil circuit clean and extending the service life of the hydraulic system. The low-pressure series filter element is also equipped with a bypass valve. When the filter element is not replaced in time, the bypass valve can automatically open to ensure the normal operation of the system. This series of products is a substitute for similar products in countries such as the United States, Germany, the United Kingdom, and Italy.

During the warranty period of a new car, substitutes for filters (filter elements) should not be used. Even after the warranty period, filters should be carefully selected. The performance of diesel filters is graded according to ISO standards. In addition to conducting performance tests according to SAE standards, air filters also need to undergo bench tests to meet requirements such as the original intake resistance of the engine's rated intake volume. A qualified oil filter must comply with the original design of engine cylinder pressure, oil temperature, flow rate, viscosity, and vehicle usage conditions, and consider the comprehensive balance of core quality. The hydraulic oil filter element is labeled with nominal filtration accuracy on the manufacturer's product sample or nameplate, rather than filtration accuracy. Only the beta value measured through testing can indicate the filtration capacity of the filter. The hydraulic oil filter element should also meet the requirements of pressure loss (the total pressure difference of the high-pressure filter should be less than 0.1PMa, and the total pressure difference of the return oil filter should be less than 0.05MPa) to ensure the balance between flow rate and filter element life.