0060D010BN4HC is suitable for hydraulic oil filter cartridges in construction machinery

0060D010BN4HC is suitable for hydraulic oil filter cartridges in construction machinery

Problems encountered during the installation of hydraulic oil filter element

We have various problems with hydraulic filter cartridges during use, and they may come out during installation

We may have a better understanding of the current noise situation. When there is noise, the machine will start to hear strange things

It's weird. What kind of situation is this? How to find the noise source and solve the noise problem is the key

Then there may be bigger problems during use, and not only that, but also this series of problems. Below are some examples

Your answer: Any mechanical equipment has a certain service life, and many devices exceed the specified service life

It will greatly reduce its work efficiency, and the same goes for hydraulic filters. If you want to avoid problems, you must choose quality

Good hydraulic filter products, otherwise serious ones may even cause production losses, especially in the filtration equipment

Backup: We all know that to ensure the normal operation of the engine, it is necessary to regularly clean or replace the hydraulic oil filter

Once the hydraulic oil filter is clogged, it will produce noise. How is this noise generated? When the filter is clogged, the liquid

Oil pressure dirt can cause the filter to become clogged, resulting in excessive pressure difference between the hydraulic oil filter and both sides

The oil level is in an unstable state. When the oil level changes, due to the hydraulic filter element being too large and negative, it is easy to cause air damage

Mixing into the oil pipeline and then spreading to the pump, pneumatic noise will be generated during extrusion

0060D010BN4HC is suitable for hydraulic oil filter cartridges in construction machinery

Steps for filtering hydraulic oil filter element

Hydraulic oil filtration 1. Before filtering hydraulic oil, all cylinders should be contracted to the bottom.

2. Use a filtering device to pump the hydraulic oil from the tank into a clean oil drum, and the remaining oil at the bottom of the tank can be used

Drain the oil through the drain port and then filter it, using the filtered oil to flush out impurities at the bottom of the fuel tank.

3. Then use a filtering device to draw the oil from the oil drum into the oil tank.

4. Run all motors in 10 gears for at least 30 seconds; Make the oil cylinder complete at least one extension and contraction. This can move the oil cylinder

Most of the oil in the motor and oil pipes is flushed out. 5. Repeat steps 1 to 3 again. Note:

Before filtering, it is necessary to check whether the hydraulic oil should be replaced. Generally, this can be achieved by checking whether the oil has any odor or

Determine whether there is no stickiness and whether the time is too long, such as exceeding 4000 hours.

Maintenance knowledge for hydraulic oil filter system

Gu'an Xiangxing Filter Cartridge Factory is a professional manufacturer specializing in the design and manufacture of hydraulic systems and hydraulic cylinders. It is a direct sales manufacturer

It is said that hydraulic systems are very safe in terms of principle and structure, but due to the complexity of different working environments

Improper use and maintenance can lead to various malfunctions. Therefore, our company has specially formulated the use and maintenance of hydraulic systems

Before using the hydraulic system, it is necessary to understand the performance of the hydraulic system and the possible faults that may occur during use

And its exclusion methods. The hydraulic system itself has many characteristics, but due to the compact structure of oil pumps and valves,

It is also very delicate, and if not careful during use, valve blockage may occur, causing the entire system to malfunction

Causing unimaginable and serious consequences. According to statistics from hydraulic system manufacturers, hydraulic system failures

More than 70% is caused by oil contamination. In the hydraulic system, we have designed several filters: oil

In theory, oil that has undergone multiple filters, such as coarse filtration at the pump suction port and fine filtration at the pump outlet

It should be relatively clean, but pollution can occur on its own in the system.