0060D020BN4HC is suitable for hydraulic oil filter cartridges in construction machinery

Hydraulic oil filter element is used to filter out solid impurities mixed from the outside or generated internally during system operation in various oil systems

Mainly installed on the oil suction line, pressure oil line, return oil line, and bypass in the system, separately

On the filtration system. Working principle of hydraulic oil filter: Industrial hydraulic oil is used for various reasons during use

It will mix in some impurities, mainly mechanical impurities, water, and air, which can cause decay

Corrosion accelerates, increases mechanical wear, reduces work efficiency, deteriorates oil products, reduces equipment service life, and is severe

It may cause oil blockage and result in production accidents. Hydraulic oil filtration for concrete conveying pumps and hydraulic fluid for construction machinery

Pressure oil filtration, filtration of hydraulic oil in hydraulic stations.

Hydraulic oil filter product features: Used to protect specific components in hydraulic systems, installed in medium pressure pipelines

The upstream of the protective component needs to be protected to filter out solid particles and gel like substances in the working medium, effectively controlling the operation

Measure the pollution level of the medium and ensure the normal operation of the components. The hydraulic oil filter element is mainly made of stainless steel woven mesh and fired

Wire mesh and iron woven mesh are made of materials, mainly using fiberglass filter paper and synthetic fiber filter paper as filter media

Wood pulp filter paper, therefore it has high concentricity, high pressure resistance, good straightness, stainless steel material, without any

Burr, with the characteristic of ensuring a long service life, is made of single-layer or multi-layer metal mesh and filter material in its construction,

The number of layers and mesh size of the wire mesh used in specific applications depend on different usage conditions and purposes.

0060D020BN4HC is suitable for hydraulic oil filter cartridges in construction machinery

In order for the paver to operate normally, hydraulic oil needs to be injected, and hydraulic oil may be affected during use

Due to various reasons, pollutants are mixed into hydraulic oil, which can cause hydraulic oil pollution and increase the spread

The wear and tear of paving machine accessories reduces the working efficiency of the paving machine, so the use of hydraulic oil filter element becomes very important

That's it.

0060D020BN4HC is suitable for hydraulic oil filter cartridges in construction machinery

To ensure the working efficiency of the hydraulic oil filter element of the paver, you must maintain the hydraulic oil filter element and pay attention to it

Subtle operations. Before replacing the hydraulic oil filter element of the paver, the original hydraulic oil should be drained first, and then the return oil should be filtered

Inspect the core, oil suction filter, and pilot filter carefully for any iron, copper, or other contaminants attached

If there are any issues with the hydraulic system components mentioned above, it may require maintenance and troubleshooting, followed by cleaning of the system

.

At the same time as replacing the hydraulic oil, all hydraulic oil filter elements, including the return oil filter element and the suction filter element, should also be replaced

The pilot filter element and all of these should not be overlooked. Don't be too wasteful, otherwise your hydraulic oil will be like it hasn't been replaced. But

And you also need to carefully distinguish the hydraulic oil grade. Different grades and brands of hydraulic oil cannot be mixed

Yes, I believe you also know this. If hydraulic oil is mixed, it may react and deteriorate, producing flocculent substances

.

Before refueling, it is necessary to install the oil suction filter. The pipe mouth covered by the oil suction filter directly leads to the main pump, and impurities are light when entering

Accelerate the wear of the main pump, and if it is heavy, start the pump. Be sure to add fuel to the standard position, neither too much nor too little

You must pay attention to the oil level gauge on the hydraulic oil tank.

The correct way of refueling is also the maintenance of the hydraulic oil filter element of the paver, after all, hydraulic oil needs to be mixed with the hydraulic oil filter

You need to consider all aspects that can affect the performance of the hydraulic oil filter element due to its close contact with the core.