0060D020P is suitable for hydraulic oil filter element of construction machinery

0060D020P is suitable for hydraulic oil filter element of construction machinery

In order for the paver to operate normally, hydraulic oil needs to be injected, and hydraulic oil may be affected during use

Due to various reasons, pollutants are mixed into hydraulic oil, which can cause hydraulic oil pollution and increase the spread

The wear and tear of paving machine accessories reduces the working efficiency of the paving machine, so the use of hydraulic oil filter element becomes very important

That's it.

To ensure the working efficiency of the hydraulic oil filter element of the paver, you must maintain the hydraulic oil filter element and pay attention to it

Subtle operations. Before replacing the hydraulic oil filter element of the paver, the original hydraulic oil should be drained first, and then the return oil should be filtered

Inspect the core, oil suction filter, and pilot filter carefully for any iron, copper, or other contaminants attached

If there are any issues with the hydraulic system components mentioned above, it may require maintenance and troubleshooting, followed by cleaning of the system

.0060D020P is suitable for hydraulic oil filter element of construction machinery

At the same time as replacing the hydraulic oil, all hydraulic oil filter elements, including the return oil filter element and the suction filter element, should also be replaced

The pilot filter element and all of these should not be overlooked. Don't be too wasteful, otherwise your hydraulic oil will be like it hasn't been replaced. But

And you also need to carefully distinguish the hydraulic oil grade. Different grades and brands of hydraulic oil cannot be mixed

Yes, I believe you also know this. If hydraulic oil is mixed, it may react and deteriorate, producing flocculent substances

.

Before refueling, it is necessary to install the oil suction filter. The pipe mouth covered by the oil suction filter directly leads to the main pump, and impurities are light when entering

Accelerate the wear of the main pump, and if it is heavy, start the pump. Be sure to add fuel to the standard position, neither too much nor too little

You must pay attention to the oil level gauge on the hydraulic oil tank.

The correct way of refueling is also the maintenance of the hydraulic oil filter element of the paver, after all, hydraulic oil needs to be mixed with the hydraulic oil filter

You need to consider all aspects that can affect the performance of the hydraulic oil filter element due to its close contact with the core.