10KV oil immersed transformer

NegotiableUpdate on 05/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The 10kV oil immersed transformer S22-M consists of three iron core single frames forming a three-dimensional equilateral triangle structure, with three magnetic circuits of the same length and all short; Three phase balance, low no-load loss, and low noise; Under the same conditions, the manufacturing process saves about 20% of silicon steel and about 3% of copper; It is the manufacture and operation of dual energy type high reliability transformers

Product Details

10KV oil immersed transformerS22-M In fact, in the field of green manufacturing, Chinese transformer manufacturing enterprises have achieved very good performance and have incomparable competitive advantages. Green manufacturing of transformers includes the production of green products, green design of raw materials, green use of products (recyclable and easy to maintain), and green functionality of products (energy-saving and emission reduction).

The three-dimensional wound iron core transformer is an energy-saving power transformer, which is a distribution transformer with a triangular three-dimensional arrangement of three geometrically identical wound iron cores assembled into a single frame, and a three-dimensional wound iron core as the magnetic circuit; The three-dimensional coiled iron core transformer creatively reforms the traditional stacked magnetic circuit structure and three-phase layout of power transformers, optimizing product performance. For example, the three-phase magnetic circuit has a symmetrical energy-saving effect, significantly reduces noise, and has stronger heat dissipation and overload capacity. The structure is compact and the volume is small.

There are many types of transformer winding deformation, but they can generally be divided into overall deformation and local deformation. If the transformer collides during transportation or installation, the transformer winding may undergo a complete displacement, which is generally intact as a whole, except for relative displacement between the transformer windings. In this case, the capacitance C of the coil to ground will change, but the inductance and inter cake capacitance of the coil will not change. The resonance peaks of the frequency response characteristic curve correspond to each other, but the resonance point will shift.

10KV oil immersed transformerS22-M, under the effect of AC voltage, some electrical energy in the dielectric will be converted into thermal energy, which is called dielectric loss. It is first caused by conduction and slow relaxation polarization, and it is also the source of electrical breakdown in the dielectric. The energy consumed per unit of time is generally referred to as dielectric loss power. The forms of dielectric loss are divided into free loss, dipole loss, conductive loss, and non-uniform dielectric loss.

How much higher is the price of S20 transformer compared to S13?

From the actual calculated price, the transformer price of S13 is about 40% higher than that of S20. A 630kva transformer, S13 costs over 59000 yuan, while S20 costs over 90000 yuan. In this way, it may seem expensive, but in fact, in the long run, it is actually cost-effective. But this is not absolute, it depends on the production scale, consumables, and processing techniques of each transformer manufacturer.

What is the value of S20 transformer?

The S20 and S22 series are updated products of transformers, which reduce the no-load rate of transformers by 10% and the load by about 20%. By using new materials to manufacture transformers, the price of raw materials has increased, and the product transformers will definitely rise. The S20 transformer is more in line with the national second level energy consumption standard. In the long run, such electrical equipment is bound to be quickly promoted and receive attention from relevant departments.