125Y regular corrugated packing

125Y regular corrugated packingThe product made of 201 material is a metal regular corrugated packing, which has the advantages of high separation efficiency, high pressure resistance, good thermal shock resistance, and high operating temperature. ‌

This type of filler is made by stamping a metal sheet with a thickness of 0.15-0.20mm into a corrugated filler with peaks and valleys. The sheet is punched with small holes with a diameter of 4mm and several fine seams with a length of about 5mm, which enhances the wetting performance and may form bidirectional permeability, with an opening rate of about 9-12%. The perforated plate surface has a special texture to increase the effective mass transfer area and evenly distribute the distribution performance of gas-liquid fluids. The product not only has a high porosity and a large specific surface area, but also has advantages such as high compressive strength, good thermal shock resistance, and high operating temperature. Its separation ability is similar to that of wire mesh corrugated packing, but its anti blocking ability is stronger than that of corrugated packing.

The corrugated packing of metal orifice plate is composed of several metal corrugated sheets arranged parallel and vertically with small holes (or no holes as needed) on the corrugated sheets. The top angle of the corrugations is about 90 °, and the channels formed by the corrugations are at a 45 ° or 30 ° angle to the vertical direction. This type of packing has the characteristics of low resistance, uniform gas-liquid distribution, high efficiency, large flux, and insignificant amplification effect, and is suitable for negative pressure, atmospheric pressure, and pressurized operations. Due to its regular structure and excellent performance,125Y regular corrugated packing201 material products have a wide range of applications in chemical, petroleum, environmental protection and other fields.