Welcome Customer !

Membership

Help

Dongguan Bangshuo Motor Co., Ltd
Custom manufacturer

Main Products:

cep-online>Products

Dongguan Bangshuo Motor Co., Ltd

  • E-mail

    tianjiangtao@bsdj168.com

  • Phone

    13650285069

  • Address

    2nd Floor, Building 1, Bochuang Park, Dalingshan Science and Technology Industrial Park, Dongguan, Guangdong

Contact Now

15W AC speed regulating motor

NegotiableUpdate on 05/08
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Scope of application: Logistics conveying equipment, packaging machinery, printing equipment and other fields

Product Details

- Product Display -
display

Micro AC speed regulating motor 15W(70*70mm)

15Dimensional drawing of W AC speed regulating motor

15W尺寸表.png

15W AC speed regulating motor model performance table

15W电机特性表.png

The capacitance varies depending on the voltage used. Therefore, it should be used correctly in accordance with the voltage used. The main cause of the malfunction is incorrect use. When placing an order, in

After confirming the voltage used, select the correct oneOrder the model.

◇ Note: Although the speed regulating motor has a speed range of 50Hz 90-1300r/min; 60Hz…90-1600r/min。 However, due to low speed (≤ 400/min), the motor torque decreases significantly,

Easy to overload, and the motor is directly connected to the fan for coolingHowever, the effect is poor and prone to heating, so it is necessary to reserve sufficient power margin and not work frequently in low-speed areas. Therefore, the motor is the most

The optimal speed range is 50Hz400-1300r/min,60Hz…400-1600r/min。

At the same time as disconnecting the power supply, the motor will instantly stop and maintain the load.

The starting and braking characteristics of the motor are directly proportional to the load inertia of the motor.

Comparison Table of Allowable Torque for 15W Gearbox/Reducer Speed Ratio

15W减速电机特性表.png

The speed is calculated by dividing the asynchronous speed of the motor (50Hz 1300r/min, 60Hz 1600r/min) by the reduction ratio. The actual speed will vary with the size of the load

Change leads to reverse change.The range of variation is around ± 8-20%.

When further deceleration is desired with a reduction ratio greater than the above table, an intermediate reducer with a reduction ratio of 1:10 can be installed between the motor and the reducer.