18615UPVC back pressure valve - safety valve

18615UPVCback pressure valve

Product Overview

18615UPVCback pressure valve,safety valve,pressure relief valve18620 back pressure valve, 18625 back pressure valve, 18632 back pressure valve, 18640 back pressure valve, 18650 back pressure valve, 18665 back pressure valve,Plastic safety valve,Plastic back pressure valveThe diaphragm and valve core are pressed against the valve seat by internal springs. When the pressure in the system pipeline exceeds the preset pressure, the diaphragm and valve core are lifted, and the medium leaks out to the return pipe and container. Due to the function of the valve, a certain pressure is formed, and the pressure can generally be adjusted. It can be used to control the flow of various types of fluids such as air, water, steam, various corrosive media, mud, oil, liquid metals, and radioactive media. The opening and closing component is a disc-shaped valve plate that rotates around its own axis inside the valve body to achieve the purpose of opening, closing, or adjusting. It mainly plays a role in cutting off and throttling on pipelines. The back pressure valve plays a protective role in the system. When the system pressure exceeds the specified value, the valve opens and releases a portion of the gas in the system/Fluid is discharged into the atmosphere/Outside the pipeline, the system pressure should not exceed the allowable value to ensure that accidents do not occur due to excessive pressure. On site, the pressure gauge in the pipeline can be used to adjust the screw0-1.0MpaSet the pressure within the range, and the release pressure is generally set higher than the system pressure0.1-0.2Mpa,The pressure regulation of the safety valve is not allowed to exceed the maximum pressure of the metering pump. It is generally installed as close as possible to the outlet of the pump, and there should be no valve between the pump and the safety valve. Protect the safety of the pump and ensure the normal operation of the system. whenThe fluid enters from the back pressure valve inlet and is blocked by the diaphragm, causing the fluid to exert upward pressure on the diaphragm. When the pressure is high enough, the spring is compressed, and the fluid lifts the diaphragm to form a channel, which flows out from the outlet of the back pressure valve;If the fluid pressure is not sufficient, it will form a build-up pressure, causing the inlet pressure to rise until it reaches the rated pressure, and lifting the diaphragm to form a passage. The rated pressure of the back pressure valve can be adjusted, usually by adjusting the top rod of the spring to adjust the length of the spring.Range of safety valve settings:0.03-1.0Mpa.

Product Structure Diagram:

UPVCWhen setting the pressure of a back pressure valve, the following points should be noted:

（1）When there are gas and liquid two-phase materials in the container, the valve should be installed in the gas phase section.

（2）When a valve is used to release flammable liquids, the outlet of the valve should be connected to the accident storage tank. When the released material is high-temperature combustible material, the receiving container should have corresponding protective facilities.

（3）Generally, valves can be vented on site, and the vent should be higher than the operator1Rice（m）The above should not face15Rice（m）The locations of open flames, sparks, and high-temperature equipment within. The valve vent of indoor equipment and containers should be led out of the roof and raised above the roof2Rice（m）Above.

（4）When there is a block valve at the inlet of the valve, the block valve should be in a normally open state and sealed with lead to avoid errors.

Main functions of back pressure valve:

1. The one-way valve on the outlet pipeline is used to prevent liquid backflow, and the back pressure valve is used to maintain a constant pressure at the pump outlet.

2. Can be used as a safety valve in systems with less stringent requirements.

3. Used in conjunction with pulsation dampers to reduce the harm of water hammer to the system, minimize the peak value of flow velocity fluctuations, and protect pipelines, elbows, and joints from pressure fluctuations.

4. Create a favorable working environment for metering pumps and improve their performance.

5.To ensure the stability of the water pump's output flow rate, if the flow rate of some pumps varies greatly with pressure, a back pressure valve can be installed at the pump outlet to stabilize the pump's output flow rate. In this case, the pressure of the back pressure valve is generally selected to be the actual operating pressure of the pump or slightly lower than the operating pressure of the pump.

6.In the case of unstable pressure in pipelines or equipment containers, the required pressure of the pipeline can be maintained to enable the pump to output flow normally.

7.Due to gravity or other factors, there is often a phenomenon of self flow or siphoning at the outlet of the pump. The back pressure valve can reduce the flow and pressure fluctuations caused by siphoning. In this case, it is generally recommended to use a pressure greater than the liquid's own pressure to prevent the liquid level from being too high2The liquid in the rice medicine box flows by itself,Optional pressure greater than0.02MPaThe back pressure valve is generally selected0.1MPajust.

Note: The above product introduction, parameters, images, and data are for reference only

【UPVC18615back pressure valve,safety valve,pressure relief valve,Plastic safety valve,Plastic back pressure valve】Produced in【Henan Hugao Valve Materials Co., Ltd】Our company is a modern comprehensive valve enterprise specializing in the field of valve fluid control, integrating research and development, design, sales, and service. Always adhere to the business principle of "people-oriented, integrity-based". Adhering to the principle of "winning reputation with service and winning the future with quality". Looking forward to working hand in hand with you for a win-win situation.