2.2KW low-noise two-stage high-pressure vortex fan

2.2KW low-noise two-stage high-pressure vortex fan
2.2KW low-noise two-stage high-pressure vortex fan--Shanghai Liangjin Electromechanical Equipment Co., Ltd,The design concept of the circular vortex fan originates from Siemens in Germany, with a complete range of 0.25-25KW models. All products in the series are made of aluminum alloy ADC12 shell, pure copper coil, with a one-year warranty and lifelong maintenance. Within one month, any quality issues will be replaced free of charge In stock, we produce and sell rotating equipment. Our company directly sells high-pressure fans, vortex air pumps, vortex air pumps, annular fans, explosion-proof blowers, high-pressure air pumps, and high-pressure suction/feeding fans

Classification of high-pressure blower and vortex air pump

Air pumps can be divided into single impeller, double impeller, and three impeller fans. As the name suggests, they are defined by the number of built-in impellers. At the same power:

Pressure: Single blade<Double blade<Three blade fan

Flow rate: single blade<double blade<three blade fan

Weight and volume: Single blade<Double blade<Three blade fan

Price: Single blade<Double blade<Three blade fan

The high-pressure vortex fan pump is an air pump that generates power based on the principle of centrifugal force, also known as a high-pressure blower or vortex air pump; In foreign countries, it is commonly referred to as an air ring fan, a side flow fan, a side duct fan, and other different names.

After the power is turned on, the fan rotates. Due to the groove design of the impeller, it will drive air flow. Therefore, air enters the pump body through the air inlet, and the air is stirred inside. Each groove is pressurized in a vortex like manner, circulating one after another to form a strong airflow energy, which is discharged from the pump body through the outlet for use.

Performance characteristics of high-pressure vortex fan:
1. Energy saving and environmental protection: Adopting the same ADC12 material as Mercedes Benz car wheels, it transcends the old casting process of pig iron and has the characteristics of "high, precision, light", etc. It is a high-quality product with high technological content, energy saving, and low-carbon. Moreover, ADC12 material has good anti-corrosion performance.

2. Widely applicable: The high-speed, high-precision, and high-temperature resistant imported bearings used are reliable in operation and can run continuously for 24 hours without stopping. At the same time, a 50/60Hz broadband motor is used to save a lot of operating costs.

3. Good performance: Suitable for 98% high requirements of various industries, it can run smoothly and continuously for 20000 hours without any maintenance. Our 2QB series products can work continuously, safely, reliably, and for long periods of time in both high and low temperature conditions, whether in tropical rainforest areas or high-altitude areas.

4. Ultra low noise: The excellent operational balance performance of the fan ensures long-lasting operation with low or no vibration during extreme operation, resulting in low noise levels that can be upgraded to meet customer requirements.

5. Easy maintenance: Apart from the impeller, the high-pressure fan has no other moving parts, and the impeller is directly connected to the motor without gears or transmission belts, resulting in higher reliability and almost maintenance free operation, saving a lot of operating and maintenance costs.

6. All products are strictly inspected by high-precision testing equipment from Germany and Japan, with high pressure, large flow rate, light weight, no oil or pollution, which can maximize the quality of the products.

Application and configuration of high-pressure vortex fan:

1. Shell material: The vortex air pump adopts * degree die cast aluminum, which is the same aluminum material as the Mercedes Benz wheel hub. Compared with ordinary aluminum alloy, die cast aluminum is stronger and has a lighter weight effect compared to iron shell fans.

2. Motor performance: The vortex air pump adopts Taiwan, China motor. The motor is a wide frequency, wide voltage motor. It is listed as follows: single-phase 110V/230V industrial three-phase: 220/380/415/660V, etc. The motor frequency can be adjusted at 45-65HZ, and IP55 protection class F insulation class. Its advantage is that domestic motors cannot reach the technology, which is favored by domestic and foreign customers.

3. Oil seal: German MERKEL oil seal is used, and the German MERKEL material is made of fluororubber that can withstand temperatures from -25 ℃ to 300 ℃. Compared to the general oil seal, its lip temperature is 20-50 ℃ higher than the working medium temperature during operation, making it more stable in performance, maintenance free, and has a longer lifespan.

wiring

1. Please use the fixed frequency of the fixed voltage (recorded on the label) for the power supply, and assemble the correct circuit according to the wiring diagram.

2. The voltage variation should be within plus or minus 5% of the fixed voltage. (10% can also be used, but when the voltage fluctuates greatly for a long time, it is easy to cause faults, which can be avoided.)

3. Due to the lack of an overheat load protection device for the blower, it is not possible to monitor its heat regularly. Therefore, please install an overload protection electromagnetic switch with the same horsepower. And adjust the safety current to be the same as or below the nameplate value.

4. Select standard wiring based on the horsepower of the motor and the electrical construction method.

The EU can refer to safety information such as EN60034, EN60204-1, EN294, and IEE wiring regulations. Specific industries and countries have further safety requirements, please consult their trade and safety regulatory units.

5. Confirm the direction of rotation:

After wiring is completed, turn on the switch briefly to confirm its rotation direction and whether there is any noise. The direction of rotation is indicated by the arrow on the blower. If the rotation direction is incorrect, the order of suction and supply air will be reversed. If it is three-phase, swap any two of the three external wires.

6. To prevent accidents caused by leakage, please install a grounding wire.

Piping of high-pressure blower

When inserting the pipe into the air inlet and outlet, please keep the center consistent and do not connect it under forced circumstances. Ducthoses can be easily connected using shock-absorbing joints and can prevent the transmission of vibrations. Please do not directly add the weight of the pipe to the flange surface of the high-pressure fan to prevent deformation. When introducing hot air, please use flexible joints to avoid the influence of thermal expansion. Avoid sudden shrinkage, expansion, or bending that may result in poor fluid efficiency.

In China, with the continuous development of economy, science and technology, foreign technology and new processes are constantly introduced. High pressure vortex fans have been widely used in fields such as sewage treatment systems, food machinery, plastic machinery, ultrasonic cleaning equipment, cleaning industrial equipment, equipment manufacturing, and civilian equipment.

1. Textile equipment: high-speed sock weaving machine; Coating thickness control and ensuring uniform thickness, removing moisture, drying, and yarn drawing machine.

2. Plastic auxiliary equipment and feeding system: In the use of the casting machine, in order to ensure high-speed production and uniform casting film, the air knife on the cooling roller forms a thin layer of air between the film and the surface of the cooling roller, which evenly cools the film; Simultaneously used for real feeding, drying, dehumidification, and feeding systems in injection molding machines.

3. Computer monitors, LCD monitors, printed circuit boards, and other products can be used in printed circuit board equipment for cleaning, cutting water, drying, and other purposes.

4. In wire and cable equipment, it can remove moisture, oil, dry, and suppress static electricity, such as removing water from precision copper pipes for air conditioning.

5. Effective control of coating thickness and ensuring uniform thickness in painting equipment; Can dry, remove moisture, dry at high temperatures over a large area, and control coating thickness; After electroplating, metal surface treatment such as cutting, drying, and degreasing.

6. Used for pneumatic conveying of cans; The use of cutting water, drying, and other food and beverage filling equipment before coding or labeling beverage bottles, cans, and various packaged foods.

7. Printing equipment: screen printing machinery; UV polishing machine, instant drying of ink within 1-5 seconds after printing.

8. Air treatment equipment that can be used for the collection, purification, and recycling of toxic and harmful gases; Gas detection equipment for atmospheric environment.

9. Specially suitable for cleaning equipment such as ultrasonic cleaning machines, PCB board cleaning and drying machines in the electronics industry, tunnel type car cleaning machines (car washing machines), commercial dishwashers, glass cleaning machines, etc.

10. Can be used for fish farming with surface aeration, oxygenation, oxygenation grids, and oxygenation systems. It can also be used in tires and rubber equipment to remove moisture/oil, dry, and suppress static electricity.

Our service philosophy:

1. Pre sales service:

We provide you with detailed technical parameters of the fan, and our technical engineers recommend the fan that is more suitable for your use. We can also customize non-standard products according to customers' special requirements, so that you can spend your money more cost effectively.

2. In sales services:

Our dedicated service personnel will track the goods with you until they arrive safely in your hands.

3. After sales service:

We carry detailed operating instructions for each fan, and operators can follow the instructions to briefly understand the principles and precautions of the fan. If you have any unclear operations, you can consult our technical personnel to explain the operation plan to you.

4. Quality assurance:

Excluding vulnerable parts, our entire product line comes with a one-year warranty and lifetime maintenance.