4-20mA current loop noise sensor

NegotiableUpdate on 04/26

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The current loop 4-20mA noise sensor is a noise sensor with a current loop 4-20 output, consisting of a current loop module and JHM-NS02 noise sensor. It is powered by DC24V and has a common ground non isolated output.

Product Details

4-20mA current loop noise sensorInstructions:

Working voltage: DC 24V stabilized power supply, working current 100mA (ripple<0.5%)

Load: 0 ohms -750 ohms (sufficient load margin, output can short-circuit)

Current loop mode output: 4 mA -20 mA

-----------------------------------------------------------------------------------

V+is connected to the positive pole O+and O - of a 24V power supply, and the output current loop is connected to the positive and negative poles. GND is connected to the negative pole of the power supply.

------------------------------------------------------------------------------------

Output algorithm: dB=(Io-4) * 100/16+30.

The noise value corresponding to a current of 15.2mA is (15.2-4) * 100/16+30=100dB.

4-20mA current loop noise sensorparameter

Product Model	JHM-NS02
Specifications	80mmX25mm
accuracy	+/-1.5dB (2Khz80dB point correction)
Conversion accuracy	0.1dB
output mode	Expand 4-20mA current loop
A-weighted measurement range	30dB to 120dB (automatic shifting)
frequency response	35 Hz to 20KHz
Frequency weighting characteristic	A weighted characteristic
Microphone manufacturer	Toshiba capacitive (windproof outer cover)
Dynamic characteristic time weighting	FAST
Working and storage temperature	-10 ----- 60℃
Working and storage humidity	10 ----- 90RH%
Power standard	DC9V-DC12V (ripple<0.5%) current 30mA
manufacturer	Beijing Jinghaiming Electronic Technology Research Institute