-
E-mail
15810973171@163.com
-
Phone
15810973171
-
Address
1802, 18th Floor, Building 5, Chengshousi Road, Fengtai District, Beijing
Product Categories
Beijing Beituo Instrument Equipment Co., Ltd
4-20mA wind speed and volume sensor
NegotiableUpdate on 03/30
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The 4-20mA online wind speed and air volume sensor can be connected to an L-shaped pitot tube or paired with an S-shaped stainless steel anti blocking pitot tube to measure the wind speed and air volume of high-temperature flue gas, corrosive gases, and other media. 4-20mA wind speed and volume sensor in stock
Product Details
4-20mA wind speed and volume sensorspotconnectableL-type pitot tube can also be used in conjunction with S-shaped stainless steel anti blocking pitot tube to measure the wind speed and volume of high-temperature flue gas, corrosive gases and other media.
1Equipped with a standard 4-digit LCD display, zero position can be adjusted on-site, and full degree can be adjusted on-site.
2Good stability, with long-term stability of up to 1% FS/year at full and zero positions. Within the compensation temperature range of 0-70 ℃, the temperature drift is less than 1% FS, and within the entire allowable operating temperature range, it is less than 1% FS.
3Equipped with reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are reversed during installation. In case of abnormalities, the transmitter will automatically limit the current to within 35mA.
4Solid state structure, no movable parts, high reliability, long service life.
5From wind pressure to steam, high-precision measurements can be made without being affected by the mass of the measured medium.
6Easy to install, simple structure, economical and durable.
4-20mA wind speed and volume sensorspotTechnical Specifications:
Measurement range: |
0~10M/S， 0~20M/S, 0~30M/S，0~40M/S |
Overload: |
5 times the standard range |
Output format: |
Wind speed, air volume |
Accuracy level: |
3%F·SDisplay resolution |
Display resolution: |
0.01 |
Power supply voltage: |
24VDC |
Load resistance: |
≤500Ω |
Measurement medium: |
Smoke air |
Long term stability: |
±1% F·S/year |
Relative humidity of the environment: |
0～95% |
Compensation temperature: |
0～70℃ |
Operating Temperature |
-10～350℃ |
Protection level: |
IP54(Optional) |
1Equipped with a standard 4-digit LCD display, zero position can be adjusted on-site, and full degree can be adjusted on-site.
2Good stability, with long-term stability of up to 1% FS/year at full and zero positions. Within the compensation temperature range of 0-70 ℃, the temperature drift is less than 1% FS, and within the entire allowable operating temperature range, it is less than 1% FS.
3Equipped with reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are reversed during installation. In case of abnormalities, the transmitter will automatically limit the current to within 35mA.
4Solid state structure, no movable parts, high reliability, long service life.
5From wind pressure to steam, high-precision measurements can be made without being affected by the mass of the measured medium.
6Easy to install, simple structure, economical and durable.
Online wind speed and volume sensorTechnical Specifications:
Measurement range: |
0~10M/S， 0~20M/S, 0~30M/S，0~40M/S |
Overload: |
5 times the standard range |
Output format: |
Wind speed, air volume |
Accuracy level: |
3%F·SDisplay resolution |
Display resolution: |
0.01 |
Power supply voltage: |
24VDC |
Load resistance: |
≤500Ω |
Measurement medium: |
Smoke air |
Long term stability: |
±1% F·S/year |
Relative humidity of the environment: |
0～95% |
Compensation temperature: |
0～70℃ |
Operating Temperature |
-10～350℃ |
Protection level: |
IP54(Optional) |
It can be connected to an L-shaped pitot tube or paired with an S-shaped stainless steel anti blocking pitot tube, and can measure the wind speed and volume of high-temperature flue gas, corrosive gases, and other media.
1Equipped with a standard 4-digit LCD display, zero position can be adjusted on-site, and full degree can be adjusted on-site.
2Good stability, with long-term stability of up to 1% FS/year at full and zero positions. Within the compensation temperature range of 0-70 ℃, the temperature drift is less than 1% FS, and within the entire allowable operating temperature range, it is less than 1% FS.
3Equipped with reverse protection and current limiting protection circuits, the transmitter will not be damaged if the positive and negative poles are reversed during installation. In case of abnormalities, the transmitter will automatically limit the current to within 35mA.
4Solid state structure, no movable parts, high reliability, long service life.
5From wind pressure to steam, high-precision measurements can be made without being affected by the mass of the measured medium.
6Easy to install, simple structure, economical and durable.
Similar Product Recommend
