- Phone
-
Address
Yangtang Industrial Park, Xicheng Economic Development Zone, Guilin City
Product Categories
Guilin Hongcheng Electromechanical Equipment Co., Ltd
9-19 9-26A high-pressure centrifugal fan
NegotiableUpdate on 05/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The 9-19 9-26A high-pressure centrifugal fan is generally used for forging furnaces and high-pressure forced ventilation, and can also be widely used for conveying materials, air, and gases that are non corrosive, non self igniting, non explosive, non volatile, and do not contain viscous substances. The temperature of the medium generally does not exceed 50 ° C (with a maximum of 80 ° C), and the content of dust and hard particles in the medium does not exceed 150mg/m3.
Product Details
This ventilation fan is a single suction type, with thirteen types of machine numbers including No.4, 4.5, 5, 5.6, 6.3, 7.1, 8, 9, 10, 11.2, 12.5, 14, and 16.
The ventilation fan can be made in two types: left or right. When viewed from the side of the electric motor, the impeller rotates clockwise and is called a right cyclone, represented by "right"; The counterclockwise rotation of the impeller is called a left cyclone, represented by "left".
The outlet position of the fan is represented by the angle of the air outlet of the casing. Both "left" and "right" can be made into six angles: 0 °, 45 °, 90 °, 135 °, 180 °, and 225 °.
The transmission modes of the fan are Type A (№ 4-6.3), Type C (№ 7.1-16), and Type D (№ 7.1-16).
№ 4~6.3 is mainly composed of impellers, casings, air inlets, brackets, etc. № 7.1-16 is mainly composed of impeller, casing, air inlet, transmission group, etc.
The 9-19 type fan has 12 blades and belongs to the forward curved blade type. The maximum circumferential velocity of the outer edge of the impeller diffuser does not exceed 140m/s. After the impeller is formed, it undergoes static and dynamic balance correction and runs smoothly.
The casing is welded with ordinary steel plates to form a snail shaped shell as a whole.
The air inlet is a convergent streamlined integrated structure, fixed to the front cover plate group with bolts.
The transmission part is composed of the main shaft, bearing box, coupling or pulley, etc. The main shaft is made of high-quality steel, and the bearing box has an overall structure, using rolling bearings and lubricated with 40 # mechanical oil.
The casing and base are made into an integrated structure for easy installation.
Main parameters of 9-19 No4A~10D high-pressure centrifugal fans
| Machine number No |
rotational speed r/min |
Equipped with motor | internet traffic m3/h |
Total pressure Pa |
|
| Model Type | Power KW | ||||
| 4A | 2900 | Y90L-2 |
2.2 | 824-1264 |
3584-3597 |
| Y100L-2 | 3 | 1410-1704 | 3507-3253 | ||
| 4.5A | 2900 | Y112M-2 | 4 | 1174-2062 | 4603-4447 |
| Y132S1-2 |
5.5 | 2281-2504 | 4297-4112 | ||
| 5A | 2900 | Y132S2-2 |
7.5 | 1610-2844 | 5697-5517 |
| Y160M1-2 | 11 | 3166-3488 | 5323-5080 | ||
| 5.6A | 2900 | Y160M1-2 |
18.5 | 2622-3619 | 7182-7109 |
| Y160L-2 | 18.5 | 3996-4901 | 6954-6400 | ||
| 6.3A | 2900 | Y160L-2 |
18.5 | 3220-5153 | 9149-9055 |
| Y200L1-2 |
30 | 5690-6978 | 8857-8148 | ||
| 7.1D |
2900 | Y200L2-2 | 37 | 4610-7376 | 11717-11596 |
| Y250M-2 |
55 | 8144-9988 | 11340-10426 | ||
| 8D | 2900 |
Y280S-2 | 75 | 6594-11649 | 15034-14546 |
| Y315S-2 |
110 | 12968-14287 | 14021-13362 | ||
| 1450 | Y132M-4 | 7.5 | 3297-4616 | 3620-3647 | |
Y160L-4 |
15 | 5275-7144 | 3584-3231 | ||
| 9D | 1450 | Y160L-4 |
15 | 4695-7511 | 4597-4551 |
| YI80L-4 |
22 | 8294-10171 | 4453-4101 | ||
| 10D | 1450 | Y200L-4 |
30 | 6440-12450 | 5840-5495 |
| Y225S-4 |
37 | 13952-15455 | 5244-4958 | ||
