-
E-mail
sales@ayan-sh.com
- Phone
-
Address
Room 1278, Building B, Fudan Software Park, No. 15 Changyi Road, Baoshan District, Shanghai
Product Categories
Shanghai Aiyan Electromechanical Control System Co., Ltd
AAM58 series Profibus DP
NegotiableUpdate on 05/07
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
PROFIBUS-DP bus, up to 12MHz Baud device sub protocol Class 1 and Class 2 (switchable) using dual core MCU technology, internal refresh time ≤ 48us programmable: single turn resolution, number of turns, setting function and counting direction can be set: upper and lower, 2 limit switches, multi turn absolute value using internationally leading gear set design, dual color LED indicating operating status and bus status
Product Details
Product Details
Key Features:
►PROFIBUS-DP bus, up to 12MHz Baud
►Device sub protocols: Class 1 and Class 2 (switchable)
►Adopting dual core MCU technology, internal refresh time ≤ 48us
►Programmable: single turn resolution, number of turns, setting function, and counting direction
►Can be set: upper and lower positions, 2 limit switches
►The multi turn absolute value adopts internationally leading gear set design
►PROFIBUS-DP bus, up to 12MHz Baud
►Device sub protocols: Class 1 and Class 2 (switchable)
►Adopting dual core MCU technology, internal refresh time ≤ 48us
►Programmable: single turn resolution, number of turns, setting function, and counting direction
►Can be set: upper and lower positions, 2 limit switches
►The multi turn absolute value adopts internationally leading gear set design
►Dual color LED indicates operating status and bus status
Application scope:
• Speed sensing, angle, distance, trajectory, tilt
• Logistics warehousing, automotive production lines, automated assembly line equipment
• Steel metallurgy, paper printing, textile machinery, water conservancy engineering surveying
• Port lifting and transportation machinery, factory automation, etc
• Used in non explosion proof environments
| Mechanical data: | meet the standard | |
|
material |
Shell: Aluminum shell | CE certification is available |
| Flange: Aluminum flange | Emission interference EN61000-6-4 | |
| Shaft: Stainless steel | Anti interference EN61000-6-2 | |
|
Axis load |
Axial: Maximum 80N | Meets the requirements of ISO9001:2015 quality management system |
| Radial: Maximum 150N | Compliant with GB/T 20540-2006, Part 1-6 Profibus specification | |
| Protection level | IP65 | Industrial Communication PROFIBUS&PROFINET Organization Member |
| Starting torque | 25℃时 ≤0.5Nm | Member ID: PI China 2018231A |
| Maximum speed | 6000RPM | Product testing unit: ITEI PROFIBUS TEST Lab |
| impact | ≤ 100g ,3ms | Test Report Number: MCDL-2018-1565-D |
| vibration | ≤ 10g （10Hz—2000Hz） | |
| weight | ≈500g | |
| Operating Temperature | -40℃—+80℃ | |
| Storage temperature | -40℃—+85℃ | |
| Electrical data: | ||||
| interface type | Profibus DP bus (Class 1 and Class 2) | |||
| Output code system | Binary code | |||
| output circuit | RS485 compliant line driver, optocoupler electrical isolation | |||
| Communication frequency | ≤12MHz | |||
| Data refresh (internal) | Class1：≤48us； Class2：≤120us | |||
| Working Voltage | 10-30VDC； Polarity protection | |||
| no-load current | ≤180mA（10VDC）； ≤90 mA（24VDC） | |||
| repeatability accuracy | ± 1 bit (actual accuracy is related to installation accuracy and axis concentricity) | |||
| Single cycle resolution | ≤ 13 digits 8192 | |||
| Multiple circles | ≤ 12 bits 4096 turns | |||
accessories
| Attachment(sold separately) | ||||||
| Name | Installation bracket | Stainless steel coupling | Spring steel coupling | 4-pole A code IP65 | 5-hole B-code IP65 | 5-pin B-code IP65 |
| schematic diagram |
|
|
|
|
|
|
| model | AZJ80 | AL4A-Bxx-xx | AL3B-xx-xx | C6T | C9T | C9FT |
| Applicable series | 58A10 | 58A10 / 58T06 | 58A10 / 58T06 | DP-R3C power supply | DP-R3C Bus in | DP-R3C Bus out |
drawing
| Mechanical dimensions (mm) | |
| Clamping synchronous flange (58A10-R3P) | Clamping synchronous flange (58A10-R3C) |
 |
 |
| Synchronous flange (58T06-R3P) | Synchronous flange (58T06-R3C) |
 |
 |
| Blind hole (58B-R3P) | Blind hole (58B-R3C) |
 |
 |
| Blind hole diameter: D (mm)=8, 10, 12, 15 optional With a depth of 30mm, it is one of the deepest holes in the domestic and international markets, which can maximize concentricity and reduce installation space |
|
Common models
| Selection instructions: | |
|
Related videos
