Aite Environmental Protection XU-B200 Oil Absorption Filter

The WU and XU series oil suction filters are manufactured using German technology, with high oil flow capacity and low resistance. The series connections use pipe thread connections, while the WU series has pipe and flange connections, which can be used universally in China and replace foreign products, suitable for different series. WU and XU series oil suction filters are generally installed at the oil suction port of hydraulic pumps to protect the pump. They belong to coarse filters and prevent the pump from sucking in large mechanical impurities. According to the needs, a bypass valve can be configured. Once the hydraulic oil filter element is blocked, if there is no one on site, the bypass valve will open when the pressure reaches 0.03Mpa to avoid pump suction damage.

1. The oil filter is easy to install and connect, simplifying the system pipeline;

2. Setting up a self sealing valve makes it very convenient to replace, clean, or repair the filter element or system;

3. Equipped with a filter pollution transmitter and an oil circuit bypass valve, it improves the reliability of the hydraulic system.

Nominal flow rate: 16-1000L/min

Filtering accuracy: 80-180 μ m

Diameter: 20-75mm

Connection method: thread, flange

1. In the metallurgical industry: used for filtering hydraulic systems of rolling mills and continuous casting machines, as well as filtering various lubrication equipment.

2. In the textile industry: purification and uniform filtration of polyester melt during the drawing process, protective filtration of air compressors, and removal of oil and water from compressed gases.

3. In the petrochemical industry: separation and recovery of products and intermediate products in refining and chemical production processes, purification of liquids and photographic films in manufacturing, and filtration of oil field well water and natural gas for particle removal.