Anoxic tank, anaerobic tank, umbrella shaped hyperbolic mixer

Anoxic tank, anaerobic tank, umbrella shaped hyperbolic mixer

Denitrification agitation: agitation during denitrification in wastewater denitrification treatment; Used in denitrification tanks, when nitrogen removal is required, a part of the biological treatment process is used to achieve the desired denitrification effect.

Mixing of A2/O tank: used for mixing anaerobic phosphorus removal and anoxic nitrogen removal in sewage and A2/O processes.

Sludge heat treatment requires thorough and gentle stirring of the sludge to obtain suitable digested sludge.

Stirring of SBR tank: used for denitrification stirring during denitrification in SBR tank treatment process, i.e. alternating biological reaction tank, which alternates between nitrification and denitrification processes.

Installation diagram:

Anoxic tank, anaerobic tank, umbrella shaped hyperbolic mixer

The difference between other agitation methods is that:
1. Due to the ideal fluid conditions, energy consumption is lower.
2. Due to the high flow rate of water in the entire pool, there will be no sludge sedimentation.
3. The mixer can self correct during operation, ensuring that the downward force is vertical and preventing unbalanced movement.
4. Omnidirectional flow, all areas in the pool can be evenly stirred without creating blind spots.
5. There are no vulnerable parts underwater, and it is easy and convenient to reach the deceleration motor for maintenance.
6. Do not use materials that are prone to rusting, and use advanced corrosion-resistant materials for both the mixing disc and mixing shaft.
7. Overall exquisite. Continuous improvement ensures an extremely long service life and sturdy and durable quality.
8. It won't block. Unlike horizontal flow mixers, there will be no substance attached to the mixing body.

Product Features:

Hyperbolic surfaces have changed the disadvantages of uneven flow velocity, dead corners, and low volume utilization of conventional mixers in the mixing tank. They generate uniform bottom omnidirectional push flow in the tank, without sedimentation, and the water surface is calm, with no air entering the water; The appearance of the mixing impeller is *, with a double curved surface design and a non blade structure. It will not produce any debris or fiber entanglement on the mixer, so no maintenance is required during normal operation.

The impeller has low speed, low wear, and good corrosion resistance, so its performance is reliable and its service life is long. Compared with conventional mixers, this high-capacity omnidirectional flow hyperbolic mixer has lower energy consumption and generally only requires stirring 1 cubic meter of sewage2-3 watts, energy-saving up to 30%~50%.

The GSJ/QSJ machine is suitable for industries such as environmental protection, chemical engineering, energy, and light industry that require stirring and mixing of liquids and liquids, liquids and solids, and liquids and gases. It is particularly suitable for stirring in sewage and water purification projects, as follows:
1. Mixing in regulating tank: regulating tank used to regulate peak volume and peak load in sewage works, aiming at homogeneous mixing, which is typically used in industrial projects, such as breweries, printing and dyeing plants, paper mills, etc.
2. Mixing and coagulation stirring: used for dissolving and stirring traditional Chinese medicine agents, as well as coagulation stirring of drugs with water; That is, if the treatment process requires additional chemical treatment, such as adding lime or other pollutants.
3. Disinfection mixing: used for mixing and disinfecting agents in contact with water; The function is to improve the mixing degree with sewage.
4. Sludge mixing: used for anaerobic digestion mixing of sludge and mixing in sludge homogenization tanks. Typical applications include sludge concentration tanks, anaerobic digestion tanks, and sludge storage tanks.
5. Anaerobic Stirring: Stirring in anaerobic wastewater treatment, used in anaerobic tanks where good homogenization and agitation are required to ensure optimal process efficiency.
6. Denitrification agitation: agitation during denitrification in wastewater denitrification treatment; Used in denitrification tanks, when nitrogen removal is required, a part of the biological treatment process is used to achieve the desired denitrification effect.
7. Mixing of A2/O tank: used for mixing anaerobic phosphorus removal and anoxic nitrogen removal in sewage and A2/O processes.
8. Sludge heat treatment requires thorough and gentle stirring of the sludge to obtain suitable digested sludge.
9. Stirring of SBR tank: used for denitrification stirring during denitrification in SBR tank treatment process, i.e. alternating biological reaction tank, which alternates between nitrification and denitrification processes

The GSJ/QSJ type impeller adopts a molding process with smooth surface, linear and flow characteristics, high strength, corrosion resistance, low resistance, and high efficiency. Adopting dry installation, the matching motor and reducer are placed above the liquid, without contact with the liquid, and there are no vulnerable parts underwater. It has a long service life and is ideal for mixing various liquids.

Product scope of application:

Ring.

Installation method:

Easy to install, for workplaces with prefabricated steel-concrete platforms, pre embedded steel plate connections or expansion bolts can be used for fixation.