Arong AL-310S knife feeder

POWER FEED, commonly known as "tool feeder", is used for automatic feed devices in milling machines. It is a very compact and clever technology product that combines mechanics and electronics. This product is mainly used in high-speed rocker arm milling machines, drilling and boring machines, small grinding machines, and machine tools. The milling machine power feeder adopts an independent power supply method to provide worktable feed power for milling machines and other equipment, replacing the traditional milling machine feed gearbox system.

The product is mainly used for the working motion of milling machine worktable in the X, Y, and Z coordinate directions, realizing forward and reverse reversal and stepless speed regulation. It can replace the traditional gearbox transmission mechanism and is a bold innovation in the development of milling machines from integral to discrete units.

The milling machine power feeder has the characteristics of low noise, high torque, high speed, easy installation, flexible operation, and beautiful appearance, which meets the requirements of ergonomics. Installed on the machine tool, it provides stable power to the machine tool, greatly improving work efficiency.
Arong AL-310S knife feederCharacteristics and parameters:

1. Small size. Easy installation;
2. Only rotating and twisting can achieve a smooth continuously variable transmission;
3. Easy to operate current protection device, press lightly to restore the feeder to work;
4. High output torque and low noise.
5. Power supply: AC110V 50/60HZ
6. Speed range: 0-140rpm
7、zui 大速度： 160rpm
8. Output torque: 15.5N. M
9. Dimensions: 290 * 100 * 270mm
10. Weight: 6.0 kg

Arong AL-310S knife feederProduct Features:

1. There is no noise when switching directions left and right, and it is very effortless and easy to operate

When escorting quickly, if the tool collides with the workpiece or instantly reverses direction, there is a special safety device that ensures that the plastic gears and electronic components are not damaged during transportation

3. The quick escort button is designed on the left and right switching handles, which conforms to ergonomics and is easy to operate quickly. It has a inching function at any feed speed, which can easily make the workpiece reach the processing position

4. The left and right switches are waterproof, oil proof, and dust-proof, and the switches are not easily damaged

5. The gears used for screw transmission are spiral bevel gears, which have high efficiency and low noise

6. The speed adjustment efficiency is good. When the tool is cutting, the change in feeding speed is small, resulting in a smooth and accurate cutting surface. When feeding at low speeds, the machine will not shake

7. The ratio of the transmission plastic gear to the motor shaft gear is zero decimal, and the two gears will not return to the original point after operation. The plastic gear has a longer service life and the noise decreases with the use of the gear

Product Introduction:

1. Mechanical structure with strong torque.

Breaking through the traditional structure of POWER TABLE FEET, adopting mechanical gear transmission, strong torque, able to withstand fast cutting and large feed, and stable speed.

2. Strong transmission force.

Using a 1/2HP motor drive, the load is due to the traditional POWER TABLE FEET.

3. Electrical protection.

Equipped with an electrical control box, it can protect the motor from damage due to overload and ensure the lifespan of the motor

4. Easy to install.

Users can install it on the milling machine themselves without requiring special skills and without affecting the accuracy of the machinery.

5. Overload safety tripping device.

The gearbox is equipped with an overload safety clutch device, which protects the gears inside the gearbox and has a long service life.

6. Low noise and strong lubrication.

The gearbox adopts oil immersion lubrication, which ensures smooth gear transmission, low noise, and strong lubrication.

7. 5 feed rates, suitable for various processing conditions.

Feed rate of 25MM, 60MM, 115MM, 210MM, 800MM per minute, providing various processing conditions to choose from; There is also a fast advance and retreat speed of 800MM/min, which can save the idle time of the cutting tool and enable the worktable to quickly run to the starting point of processing.

8. The action is light and does not hinder the work schedule.

The gearbox has a small volume, does not hinder the working stroke, and can be manually fed to directly drive the lead screw of the milling machine without going through the gear transmission inside the gearbox, making it easy to feel.

9. Parameters:

Torque range: 5.6-225N. M

Net weight: 12KG Gross weight: 13KG

Noise: less than or equal to 50 decibels