-
E-mail
2942709300@qq.com
-
Phone
13631787342
-
Address
Antai Building, No.4 Hongbao Road, Dongcheng Street, Dongguan City
Product Categories
Dongguan Haoen Automation Equipment Co., Ltd
Automotive parts waterproof test box
NegotiableUpdate on 03/18
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The waterproof test box for automotive parts is suitable for external lighting and signal devices, as well as for protecting the outer shell of automotive lighting fixtures. It can provide realistic simulation of various environments such as water and spray tests that electronic products and their components may be subjected to during transportation and use.
Product Details
1、 Introduction
Automotive parts waterproof test boxThe main function of this equipment is to test the performance of products during storage, transportation, and use in rainy weather environments. It is mainly used for testing the physical and other related properties of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles, and their parts under simulated rainy weather conditions. After testing, the performance of the product is judged to meet the requirements through calibration, in order to facilitate the design, improvement, calibration, and factory inspection of the product.
IIAutomotive parts waterproof test boxmeet the standard
IPX5 and IPX6 protection levels are specified in ISO20653:2006, GB2423,38/IEC60068-2-18, GB4208-2017/IEC 60529:2003.
3、 Product Structure
A water tank is installed at the bottom, which is pumped and pressurized by a stainless steel water pump inside the right control box before being sent to the nozzle of the side spray pipe device. The nozzle continuously sprays water onto the sample on the turntable, and then scatters into the water tank, forming a water circulation system. Design flow meters, pressure gauges, electronic valves and other control components for the outlet of the water pump.
3、 Main technical parameters:
Model: HE-LY-IP56H
Inner box dimensions |
W1000×D1000×H1000 mm |
outer box dimensions |
Approximately W3800 × D1060 × H1700 mm |
turntable diameter |
600 mm |
Bearing capacity of turntable |
20 kg |
turntable speed |
3±1R/min |
Affected by the water surface |
product side |
Number of sprinkler heads |
2; One IPX5 nozzle and one IPX6 nozzle are included |
Spray hole inner diameter |
6.3 mm (IPX5 rating); 12.5 mm (IPX6 rating) |
Spray flow rate |
12.5 ± 0.625 (L/min) (IPX5 rating); 100 ± 5 (L/min) (IPX6 rating) |
pipe diameter |
One quarter inch and one inch soft pressure tube each |
Spray pressure |
30-200kpa (adjusted according to flow rate) |
Spray test time |
At least 3 minutes or more (adjustable) |
water source |
Suggest using purified water or distilled water |
Inner box material |
SUS304 stainless steel |
Shell material |
Cold rolled board baking paint |
