BGJ-C-1C Bearing Induction Disassembler

NegotiableUpdate on 04/03

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The BGJ-C-1C bearing induction disassembler is widely used in steel rolling mills, railway locomotive depots, ports, docks, and other industrial and mining enterprises. The new generation product for thermal disassembly of bearing inner rings, retaining rings, sealing rings, gears, and shaft cutters applies the principle of electromagnetic induction to generate induced current in the bearing inner ring, causing it to heat up and expand in a short period of time, thereby creating gaps at the mating area and achieving the goal of easy disassembly. Due to the rapid, uniform, clean and pollution-free induction heating, high heating quality, and ensuring that bearings are not damaged, this disassembly method has replaced baking, oil boiling and other methods.

Product Details

BGJ-C-1C Bearing Induction DisassemblerWidely used in steel mills, railway locomotive depots, ports, docks, and other industrial and mining enterprises. The new generation product for thermal disassembly of bearing inner rings, retaining rings, sealing rings, gears, and shaft cutters applies the principle of electromagnetic induction to generate induced current in the bearing inner ring, causing it to heat up and expand in a short period of time, thereby creating gaps at the mating area and achieving the goal of easy disassembly. Due to the rapid, uniform, clean and pollution-free induction heating, high heating quality, and ensuring that bearings are not damaged, this disassembly method has replaced baking, oil boiling and other methods.

1BGJ-C-1C Bearing Induction DisassemblerTechnical Specifications:

model	BGJ-C-1A	BGJ-C-1B	BGJ-C-1C	BGJ-C-1D
rated power	60KW	80KW	100KW	120KW
rated voltage	380V	380V	380V	380V
rated current	150A	210A	260A	310A
Heating the workpiece	100-300mm	300-450mm	450-700mm	700-1000mm
Zui high temperature	<300 ℃	<300 ℃	<300 ℃	<300

2、 Main structure

This machine consists of a main control cabinet, induction coils, and other components.

3、 Usage and Operation

1. Connect the control cabinet to a controlled power source.

2. Connect the control cabinet to the induction coil with wires.

3. Close the control switch, and the voltmeter should indicate.

4. Insert the induction coil onto the bearing.

5. Adjust the required heating time, press the start button to start heating. When the workpiece is heated to the required time, the host will automatically turn off the power or press the stop switch once.

6. After heating, remove the induction coil and remove the bearing.

7. This machine can be heated and stopped by a control cabinet or induction coil.

4、 Precautions

1. This series of bearing induction disassemblers must be customized based on the specifications and dimensions of the heated workpiece provided by the user.

2. Be careful when removing the workpiece to prevent burns.

3. The heating component of the induction coil can only be removed after the host is powered off.