Battery voltage measurement module

Introduction：

DiLiCovoltageThe measurement system canQuickly and reliably measure fuel cells and electricitybottleEach one on the electrolytic cellsingleThe voltage of the battery,at the same timeAdjustable limit values for monitoring under voltage and over voltage；Integrated without electricitymomentumThe contact can be used for customer control to protect the battery from damage when the voltage limit is reachedorThe system is not affected by faults.For48Battery voltageallmeasurementofintervaltimeGundam20millisecondFor240Up to one battery30millisecond. Modules can be connected through the bus systemCANInterface connection for measurement96More than one batteryheapThe voltageInmeasure voltageAt that time,DiLiCotechnologypossiblyLowering the groundLoad electrodeThe impact is only extremelow±2µAThe power consumption,Use electricitysourceIt does not consume energy at all. voltagemeasurement systemSuitable for all ordinary energy converters and storage systems,Each battery'sVoltage can reach4.5 V，Measurement data passed throughRS232orCANThe interface is transmitted to the controller.The system is equipped withThere is an external power source(15 - 36 VDC)and a50needleDtypeConnect the connector socket to the batteryThe polar plate,利用DiLiCoVoltage measurement systemTimely detection of errors and adverse operating conditionsDiscoveringBattery failure can avoid downtime and maintenance costs, increasing the lifespan of the battery.

Application:

Monitor each oneindependentOvervoltage and undervoltage of batteriesstatus

Monitor the system and in the event of errors or damage to individual unitstimelyShut down the system

long-termMonitoring fuel cells and electrolytic cells

inResearch and DevelopmentChineseanalysisbattery'sagingprocess

Features:

●By continuously monitoring the battery voltage,discoverbattery'sproblem, thus avoiding system failures

●inbatterycontinuous operationprocessMeasuring voltage ratio takes time to find defective batteries andpost-productionexpensiveofLower maintenance costs

●By utilizing battery voltage monitoring,yesQuality assurance during battery operation,canIdentify system errors in batteries

●Information collected by measuring battery voltage，Can be used to optimize operational management or next-generation batteriesResearch and Development

Technical Specifications:

●measurement channel:48or96

●Voltage measurement range: Voltage:0-4.5V

●Voltage measurement accuracy:±0.1mV

●measure time: 20ms(48通道); 34ms(96通道)

●measurement accuracy: 16Bit byte

●current consumption:±250nA(idle mode); ±2µA(Measurement Mode)

●communication interface:RS232 or CAN

●Battery connection port: 50needleDtypejoint