Fuel cell stack testing fixture

NegotiableUpdate on 03/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The qCf fuel cell stack testing system is a tool for researching and developing up to 5 PEM fuel cell stacks that can or cannot be replaced. It meets high requirements while easily testing various internal components such as proton membranes, electrodes, CCMs, MEAs, and GDLs; The $r $nqCf stack testing system and its stacking device directly adjust the contact pressure on the stack through pneumatic pistons, with a maximum of 5 cells per 25cm2 of active area, thus establishing reproducible testing conditions; The flow channel and MEA components can be easily replaced and tested under different operating conditions.

Product Details

⇒ Quick and easy assembly 燃料电池电堆测试夹具

⇒ Up to5Cell battery

⇒ Each unit25cm2effective area

⇒ Can measure the voltage and temperature of each battery

⇒ Can change the flow velocity of the medium

⇒ The temperature is as high as140°C

⇒ High reproducibility of measurement results

qCfThe stack testing system is researched and developed for up to5piecePEMTools that can or cannot be used for fuel cell stacks. It meets high requirements while easily testing various internal components such as proton membranes, electrodesCCMsTheMEAs and GDLsWait;

qCfThe stack testing system and its stacking device directly adjust the contact pressure on the stack through pneumatic pistons25cm2The maximum number of activity areas is5Battery cells are used to establish reproducible testing conditions; Flow channel andMEAComponents can be easily replaced and tested under different operating conditions.

燃料电池电堆测试夹具

◎Variable gas flow channels, such asUType orzType configuration

◎Measure the voltage and temperature of each battery

◎Directly stack batteries using a stacking framework

◎Continuously adjustable contact pressure ensures reproducibility of testing conditions

◎The thickness of internal fuel cell components can be changed

◎Replacing the battery clamp does not require replacing the hose connector and wires

◎Quick and convenient installation without the need for tools/Fixed battery fixture

Technical Specifications

● Number of batteries:2-5Single cell batteries are optional, with each battery having an active area25cm²， Graphite flow channel

● Each battery has a temperature and voltage sensor

● Test component thickness: Each film has an electrical conductivity of up to0.9mm

● temperature control:cooling/heat(Additional circulating water bath is required)

● Operating Temperature:Gundam140℃

● Stress6.28 kNor2.5 N/mm²(pressure8 bar)

● Pneumatic air interface:Ø 4mm

● fuel/Air interface:Ø 8mm

● Electrical interface:1mmMeasurement line socket(sensor)；8mmLoad line socket(current)

● size(LxWxH):465 x 175 x 242

● weight(Net weight): 13.5kg