Built in ozone sterilizer, water tank self-cleaning sterilizer

Built in ozone sterilizerThe sterilizer has a simple structure, wide applicability, and strong practicality, which is highly popular among users. The sterilizer structure consists of a control box and an aeration tank. The control box is equipped with an ozone generator, and the aeration tank is equipped with an aeration disc. It is connected to water through a gas pipe and mixed with the aeration disc to turn large ozone bubbles into small bubbles, increasing the contact area with water and thus increasing the dissolution rate, achieving better disinfection and sterilization effects.
Scope of application:
Suitable for use in fire water tanks (pools);
Secondary disinfection of water and water storage equipment and facilities;
Disinfection and disinfection of water pools, fountains, and landscape water;
Sterilization and algae killing of industrial circulating water
Implementation standards:
It has passed the disinfection product certification organized by the national health department and is produced according to enterprise standards.
GB17051-1997 "Sanitary Code for Secondary Water Supply Facilities".
GB4793.1-2007 Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 1: General Requirements
The second is engineering standards.
Design Code for Building Water Supply and Drainage GB50015-2003.
GB50242-2002 "Code for Acceptance of Construction Quality of Building Water Supply, Drainage and Heating Engineering".
The third is the relevant standard drawings.
2SS 104 "Selection and Installation of Secondary Water Supply Disinfection Equipment"
Job characteristics:
The host adopts high concentration ozone disinfection, with high ozone concentration, large output, and stable operation;
The core component of the power supply is digital control power technology, which has three major functions: voltage stabilization, frequency conversion, and voltage boosting. The discharge body is matched and adopts power soft switching technology, with an efficiency of over 99%, safe and reliable, and strong sterilization power;
Automatic operation, adjustable working status, no dedicated person to supervise;
Easy installation, simple operation, no secondary pollution, disinfectant products are water and oxygen, safe and reliable;
The tank body is made of food grade 304 stainless steel material, which is safe and hygienic, corrosion-resistant, has good disinfection effect, and is sterilized;
Fully automatic purification, fast sterilization speed, wide spectrum, can kill algae in water, inhibit their growth and reproduction, reduce the number of cleaning water tanks, and save costs;
Built in ozone sterilizerInstallation instructions:
Install the energy controller in a dry and ventilated area with measures to prevent rain and water.
Connect the control cable to the energy controller.
Raise the water level above the energy release ring and connect the 220V main power supply within the specified time to start the self-cleaning sterilizer in the water tank.
When cleaning and maintaining water tanks and pools, the main power supply of the equipment should be cut off first, and then the power should be turned on according to the prescribed time when using it.