Intelligent medium voltage ultraviolet sterilizer and ultraviolet sterilization equipment

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The intelligent medium voltage ultraviolet sterilizer, which is filled with inert gas inside the lamp tube at a pressure equivalent to atmospheric pressure, 0.2Mpa-0.4ka, is 100 times lower than low pressure. It can emit multi wavelength ultraviolet light with a wider wavelength range between 200m-400mm, effectively destroying microbial organisms or preventing their replication, achieving the purpose of disinfection. Our company produces medium voltage ultraviolet disinfection equipment, using medium voltage ultraviolet sterilization lamps. The cylinder is made of food grade 304/316 stainless steel. When water flows through the cylinder, it is irradiated with ultraviolet radiation for sterilization, without any pollution, and is safe and efficient.

Product Details

中-压_04.jpg

Intelligent medium voltage ultraviolet sterilizerEquipment features:

Medium voltage ultraviolet lamp: using medium voltage ultraviolet lamp, high power, reducing the number of lamp configurations, can handle high flow water bodies. Compared with low-voltage ultraviolet lamps, ultraviolet light has a higher intensity and a wider wavelength of radiation.

Temperature probe: Immediately detect the temperature of the water to ensure that the equipment operates within the working temperature range of 0-45 degrees.

UV intensity probe: The intensity monitor used in the medium voltage UV sterilizer only responds to specific UV wavelengths that have sterilization effects. It can be connected to computers and PLCs, saving power consumption for the operation of the system.

Quartz sleeve: In order to better protect the ultraviolet lamp tube, there is a quartz sleeve outside each ultraviolet lamp tube. Therefore, the quality of quartz tubing largely determines the sterilization effect of medium voltage ultraviolet sterilizers, and high-quality quartz tubing can ensure that the penetration rate of ultraviolet rays reaches over 90%.

Daily cleaning: Due to water quality and exposure to ultraviolet light, the surface of the quartz sleeve will crystallize after a period of use. The thickness of the crystals will reach a certain level, which will affect the penetration ratio of ultraviolet light. Therefore, the quartz sleeve needs to be cleaned regularly. The medium voltage ultraviolet sterilizer is equipped with an automatic cleaning system, which can automatically clean the quartz sleeve at regular intervals based on the readings of the ultraviolet intensity detector. During the cleaning process, the system operates normally without the need for water supply or manual intervention, greatly reducing the workload of on-site personnel.

Intelligent medium voltage ultraviolet sterilizerDaily inspection and testing:

After every 4-5 weeks of use, the equipment should be inspected for any of the following abnormal conditions

The power cord or plug is abnormally hot and has a burning smell.

Whether there is water leakage at the welding part, interface part, and both ends of the quartz tube of the pipeline.

Whether the control cabinet indicator lights and lamps are lit up normally.

Low sterilization efficiency.

● Other abnormal faults.

When the above situation occurs, stop using the device to prevent accidents. Please follow the "Common Troubleshooting Methods" to troubleshoot the problem. If the problem still cannot be resolved, please contact our company, its agents, and intermediaries.

Note: Blue, green, and yellow colors on both ends of the device's light tube are normal phenomena.