-
E-mail
shjjsb@163.com
-
Phone
15821960580
-
Address
Room 312, Office Building 8, Jiangqiao Wanda Plaza, Jiading District, Shanghai
Product Categories
Jingjia Electromechanical Equipment (Shanghai) Co., Ltd
C61100 series horizontal lathe
NegotiableUpdate on 04/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
C61100 series horizontal lathe
Product Details
C61100 series horizontal lathe
Overview: item eye ginseng number rule grid maximumworkpieceswing diameter Rotation diameter on the bed φ1000mm Rotation diameter on the saddle of the bed φ630mm Maximum workpiece length The maximum distance between the two peaks 1500mm 2000mm 3000mm Maximum workpiece turning length 1300mm 1800mm 2800mm Bed and spindle Bed length 4200mm 4700mm 5700mm Bed rail width 755mm Main axis number one A15 Front taper of spindle hole 140#metric taper Spindle through-hole diameter φ130mm Top taper Mo's No. 6 Specification of spindle front bearing φ200mm Specification of bearings in the main shaft φ180mm Specification of spindle rear bearing φ160mm tailstock Diameter of tailstock sleeve φ160mm Tail socket taper hole Mo's No. 6 Effective travel of tailstock sleeve 300mm Tail seat guide rail width 460mm knife holder Allow maximum tool cross-section 45mm×45mm Rotation angle of the middle knife holder ±90° Maximum travel of the upper knife holder 300mm Maximum travel of the lower knife holder 520mm Motion parameters Accumulated spindle speed 21level Main spindle speed range 3.15～315r/min feed Number of types of longitudinal and transverse feed rates 56 types each Range of feed rate Range of lateral feed rate 0.05～6mm/r Range of longitudinal feed rate 0.1～12mm/r Main spindle screw diameter and pitch Main screw diameter φ70 mm Main screw pitch 12 mm Turning thread range The number of types of metric threads 44plant Range of metric threads 1～120mm The number of types of British thread 42plant EnglishScope of threading 30～1/4tpi The number of types of modular threads 45plant modulusRange of threads 0.5~ 60mm Number of types of radial threads 47plant Radial jointRange of threads 60～0.5DP Power parameters power supply Three phase AC power Main motor model Y180L-4 Main motor power 22kW Main motor speed 1450 r/min Quick motor model YS90S-2 Fast motor power 1.5 kW Fast motor speed 2800 r/min Cooling pump model AYB-25 Cooling pump power 0.12 kW Cooling pump flow rate 25L/min Control and lubrication system Gear pump model HY01-12×20 Gear pump pressure 2MPa Gear pump flow rate 12L/min Gear pump speed 1450 r/min Working pressure of oil cylinder 1～1.5 MPa Outline dimensions and net weight of the machine tool height 1700mm length 4600mm 5100mm 6100mm width 1400mm Net weight 9200kg 10200kg 10700kg
This machine tool is mainly responsible for various turning tasks, and it can turn the end faces, outer circles, inner holes, metric threads, imperial threads, modular threads, radial pitch threads, etc. of various parts. The taper can be shortened by using the upper tool holder alone, or the taper can be lengthened by using the upper tool holder in conjunction with the longitudinal feed motor. In addition, it can also undertake drilling, nesting, boring and other processes, and the power, speed, rigidity and other aspects of the machine tool can well meet the needs of rough and fine turning. This machine tool is also suitable for strong turning with hard alloy cutting tools, processing various black and non-ferrous metals.
Technical specifications:
Similar Product Recommend
