CA2000 Breath Alcohol Tester

NegotiableUpdate on 02/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Operation method: Press the power switch, the instrument performs internal self check and preheating, displays a countdown from 200 to 000, lasting for 20 seconds; The countdown ends with a sound prompt and the green light turns on, indicating that the instrument is functioning properly and testing can begin; Aim at the air inlet and blow air for about 5 seconds. If alcohol is detected, the buzzer will sound and the red and green lights will flash simultaneously. In 4 seconds, the concentration data will be displayed. If the concentration is between 0.00 and 0.05, only the green light will flash; If it is greater than or equal to 0.05, only the red light will flash and accompanied by a rapid sound alarm. After holding the concentration data for 15 seconds, the instrument display changes to OFF; If no alcohol is detected from the blowing air or no detection is performed within 30 seconds after turning on the device, the instrument display will change from 000 to OFF; When the instrument displays OFF, it must be turned off to restart the measurement; Caution: ◆ Do not blow smoke into the air vent. Liquid cannot enter the pores. Do not block the air outlet; The yellow light indicates that the power supply voltage is low and the battery needs to be replaced;

Product Details

The CA2000 breath alcohol tester is a reliable, accurate, and respiratory alcohol detector. The core components of CA2000 use micro oxide semiconductors, which can accurately detect gas alcohol content without interference from non-alcoholic gases such as smoke, cola, coffee, etc. CA2000 is compact, lightweight, and easy to operate, making it the choice for portable applications.

Main technical parameters:
Display: Three digit display (x.xx% BAC/BRAC);
Detection range: 0.00-0.40% BAC or 0.00-2.00% BRAC;
Detection accuracy: ± 0.01% (0.01BAC) or ± 0.05mg/liter (0.50 BRAC);
Recovery time: 30 seconds
Preheating time: 20 seconds
Sensing time: 5 seconds
Extremely low power consumption: a 9-volt square battery can detect more than 300 times;
Bright characters: Red LED displays data, clearly visible at night;
Sound alarm: When the alcohol content exceeds the limit, the buzzer will automatically sound an alarm;
Size and weight: 120 × 60 × 25 (mm), 135g (including battery);
Outer shell: shockproof injection molded shell;
Standard configuration: host, 5 blowports, 9V alkaline battery, user manual, instrument box;

Operation method:
Press the power switch to perform internal self check and preheating of the instrument, displaying a countdown from 200 to 000 for 20 seconds;
The countdown ends with a sound prompt and the green light turns on, indicating that the instrument is functioning properly and testing can begin;
Aim at the air inlet and blow air for about 5 seconds. If alcohol is detected, the buzzer will sound and the red and green lights will flash simultaneously. In 4 seconds, the concentration data will be displayed. If the concentration is between 0.00 and 0.05, only the green light will flash; If it is greater than or equal to 0.05, only the red light will flash and accompanied by a rapid sound alarm. After holding the concentration data for 15 seconds, the instrument display changes to OFF;
If no alcohol is detected from the blowing air or no detection is performed within 30 seconds after turning on the device, the instrument display will change from 000 to OFF;
When the instrument displays OFF, it must be turned off to restart the measurement;

matters needing attention:
◆ Do not blow smoke into the air vent. Liquid cannot enter the pores. Do not block the air outlet;
The yellow light indicates that the power supply voltage is low and the battery needs to be replaced;