CPVC plastic ball valve

NegotiableUpdate on 04/05

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Q41F plastic CPVC ball valve advantages: 1. Sanitary indicators meet national hygiene standards. 2. Compact and beautiful appearance. 3. Light weight and easy installation. 4. Sanitary and non-toxic material. 5. Wear resistant and easy to disassemble

Product Details

Q41FPlastic CPVC ball valveAdvantages:

1. Health indicators meet national health standards

2. Compact and aesthetically pleasing exterior structure

3. The body is lightweight and easy to install

4. Material is hygienic and non-toxic

5. Wear resistant, easy to disassemble, and easy to maintain

6. Applicable fluids: water, air, oil, corrosive chemical liquids

7. Wide temperature range: 0 ℃ -85 ℃

8. Has excellent strength and toughness

9. Has excellent chemical corrosion resistance

10. The flame retardant performance is self extinguishing

11. Low thermal conductivity, 1/200 of steel

12. The content of heavy ions in the medium reaches that of ultrapure water

Plastic CPVC ball valveKey points of construction and installation

1) The installation position, height, and import/export direction must meet the design requirements, and the connection should be firm and tight.

2) All types of manual valves installed on insulated pipelines must not have handles facing downwards.

3) Before installing the valve, a visual inspection must be conducted, and the valve nameplate should comply with the current national standard "General Valve Marking" GB 12220. For valves with a working pressure greater than 1.0 MPa and a shut-off function on the main pipeline, strength and tightness tests should be conducted before installation, and they can only be used after passing the tests. During the strength test, the test pressure shall be 1.5 times the nominal pressure, and the duration shall not be less than 5 minutes. The valve shell and packing shall be qualified if there is no leakage. During the tightness test, the test pressure is 1.1 times the nominal pressure; The test pressure should meet the requirements of GB 50243 standard for the duration of the test, and it is considered qualified if there is no leakage on the sealing surface of the valve disc.

4) Install a sealing gasket between the valve flange and the pipeline flange according to the pipeline design requirements.

5) Ball valves with transmission mechanisms should be installed according to the instructions in the product manual

Plastic CPVC ball valveConnection size:

DN	D1	D				L	d	n				￠				Nominal Pressure
DN	D1	HG	JIS	DIN	ANSI	L	d	HG	JIS	DIN	ANSI	HG	JIS	DIN	ANSI	PVDF	RPP
15	95	65	70	65	60	100	14	4	4	4	4	14	15	14	16	1.2	1
20	105	75	75	75	70	120	16	4	4	4	4	14	15	14	16	1.2	1
25	115	85	90	85	80	140	16	4	4	4	4	14	19	14	16	1.2	1
32	135	100				160	16	4				18				1.2	1
40	145	110	105	110	98	165	16	4	4	4	4	18	19	18	16	1.2	1
50	160	125	120	125	120	180	18	4	4	4	4	18	19	18	19	1.2	1
65	180	145	140	145	140	220	22	4	4	4	4	18	19	18	14	1.2	1
80	195	160	150	160	152	250	25	4	8	8	4	18	19	18	14	1.2	1
100	215	160	175	180	190	280	25	8	8	8	8	18	19	18	19	1.2	1
125	245	210	210	210	216	320	30	8	8	8	8	18	23	18	22	1	0.8
150	280	240	240	240	240	360	30	8	8	8	8	23	23	23	22	1	0.8
200	335	295	295	295	298	400	35	8	12	8	8	23	23	23	22	0.8	0.8
250	395	350	355	350	362	500	38	12	12	12	12	23	23	23	22	0.8	0.6
300	455	400	400	400	432	600	40	12	16	12	12	23	25	23	25	0.8	0.5

CPVC plastic ball valveMaterial List of Parts:

NO	name	material
1	valve body	FRPPThePVDFTheCPVC
2	ball	FRPPThePVDFTheCPVC
3	sealing ring	PTER<<F4〉
4	Ness	FRPPThePVDFTheCPVC
5	handle	ABS
6	Tighten the nut	FRPPThePVDFTheCPVC
7	seal	PTER<<F4〉
8	valve stem	FRPPThePVDFTheCPVC

Plastic raw material name and applicable temperature:

UPVC rigid polyvinyl chloride temperature -10 ° C~70 ° C

CPVC 氯化聚氯乙烯温度-40 °C~95 °C

RPP enhanced polypropylene temperature -20 ° C~90 ° C

PVDF polyvinylidene fluoride temperature 40 ° C~140 ° C