Cantilever beam weighing sensor KJT-XB/WY-307001

The weighing module is a practical structural accessory that needs to be combined with a cantilever beam sensor. It consists of two boards: a top plate, a base plate, a cantilever beam weighing sensor, a support column, and a support bolt. The largest component of the weighing module is

The weighing module is a practical structural accessory that needs to be combined with a cantilever beam sensor before it can be used. It is composed of two boards: a top plate, a base plate, a cantilever beam weighing sensor, a support column, and a support bolt. The biggest feature of the weighing module is that it is not limited by the site. Generally, the hopper scale has three or four corners, or the two sides on top of the tank container, which does not occupy an area. This makes installation much more convenient, and assembly and disassembly are very flexible. Maintenance is also convenient, cheap, and affordable. If the sensor is broken, the support screw needs to be adjusted to lift the weighing body. The weighing module can be replaced without dismantling.

Range (kg): 50 100 200 500 1000

Technical Specifications

Product Model	KJT-XB/WY-307001
measurement range	t	1
Output sensitivity	%mv/v	2.0±10
Zero point output	%FS	±1%
nonlinear	%FS	0.05
lag	%FS	0.03
repetitiveness	%FS	0.03
Creep (30 minutes)	%FS	0.03
Temperature sensitivity drift	%FS/10℃	0.03
Zero temperature drift	%FS/10℃	0.05
Response frequency	khz	10
material	alloy steel
impedance	Ω	700/1400
insulation resistance	MΩ/100VDC	≥5000
Operating voltage	V(DC)	5-15
Working temperature range	℃	-20~80
safety overload	%	150
Extreme Overload	%	200
Cable specifications	∮5
Ultimate tensile strength of cable	Kg	10