Cantilever beam weighing sensor KJT-XB/WY-309001

The cantilever beam weighing sensor, also known as the shear beam weighing sensor, is mostly rectangular in shape, with the strain zone located in the middle of the sensor. Generally, there are two fixing holes at the tail end and a pressure bearing accessory at the front end to enable it to bear weight well. Its advantages are mainly reflected in

The cantilever beam weighing sensor, also known as the shear beam weighing sensor, is mostly rectangular in shape, with the strain zone located in the middle of the sensor. Generally, there are two fixing holes at the tail end and a pressure bearing accessory at the front end to enable it to bear weight well. Its advantages are mainly reflected in its easy installation, with two mounting holes that can be easily fixed to the base or scale platform. Convenient for maintenance and replacement. Its ability to resist eccentric loads is also outstanding among many types of sensors, and its pressure bearing attachment has a universal joint that can accurately handle forces in all directions.


Range (KN): 6 10

measurement range	t	1
Output sensitivity	%mv/v	2.0±10
Zero point output	%FS	±1%
nonlinear	%FS	0.05
lag	%FS	0.05
repetitiveness	%FS	0.05
Creep (30 minutes)	%FS	0.05
Temperature sensitivity drift	%FS/10℃	0.05
Zero temperature drift	%FS/10℃	0.05
Response frequency	khz	10
material	alloy steel
impedance	Ω	700/1400
insulation resistance	MΩ/100VDC	≥5000
Operating voltage	V(DC)	5-15
Working temperature range	℃	-20~80
safety overload	%	150
Extreme Overload	%	200
Cable specifications	∮5
Ultimate tensile strength of cable	Kg	10