-
E-mail
358143271@qq.com
-
Phone
13319444134
-
Address
1210, 12th Floor, Building 1, No.5 Ronghua Middle Road, Beijing Economic and Technological Development Zone, Beijing
Product Categories
- Single wire and cable vertical combustion tester
- Glass ball impact testing machine
- Air leakage detector for fresh air system
- Thermal on-site testing of building wall enclosure structure
- Heat transfer coefficient of enclosure structure
- Coating thickness gauge
- Fully automatic hollow glass dew point meter
- Air duct leakage detection equipment
- Ultrasonic flaw detector standard test block
- Steel structure anti slip coefficient detector
- Measurement of heat transfer coefficient for doors and windows
- All glass impact testing machine for hail bags
Beijing Qianli Technology Co., Ltd
Coating thickness gauge
NegotiableUpdate on 01/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The coating thickness gauge can be used for thickness measurement of electroplated coatings, paint layers, enamel layers, Babbitt alloy tiles, aluminum tile phosphating layers, paper, etc. It can also be used for thickness measurement of ship paint and underwater structural attachments. This instrument uses magnetic thickness measurement method to non destructively measure the thickness of non-magnetic coatings (such as aluminum, chromium, enamel) on magnetic metal substrates (such as steel, iron, alloys).
Product Details
Coating thickness gaugeScope of application:
It can be used for thickness measurement of electroplating coatings, paint layers, enamel layers, Babbitt alloy tiles, aluminum tile phosphating layers, paper, etc. It can also be used for thickness measurement of ship hull paint and underwater structural attachments. The thickness of non-magnetic coatings (such as aluminum, chromium, copper, enamel, rubber, paint, etc.) on magnetic metal substrates (such as steel, iron, alloys, and hard magnetic steel) can be measured non destructively. This instrument can be widely used in testing fields such as electroplating, anti-corrosion, aerospace, chemical, automotive, shipbuilding, light industry, and commercial inspection. It is an instrument specialized in material protection.
Coating thickness gaugeTechnical Specifications:
1. Measurement range: (0-1250) μ m (F1, N1 probes) F400 probe can detect small workpieces F10 probe can reach 10mm
2. Resolution: 0.1 μ m (F1, N1 probes)
3. Indication accuracy: ± (2% H+1) μ m H is the measured coating thickness
4. Display mode: 128x64 dot matrix LCD
5. Storage capacity: Can store 5 sets (up to 100 test values per set) of measurement data
6. Unit system: Metric (μ m) and Imperial (mil) can be freely converted
7. Working voltage: 3V (2 No. 5 alkaline batteries)
8. Working hours: Over 200 hours (without backlight)
9. Communication interface: USB communication interface, capable of connecting and communicating with a PC
10. Dimensions: 115mx67mmx31mm
11. Weight: 340g
Similar Product Recommend
