-
E-mail
358143271@qq.com
-
Phone
13319444134
-
Address
1210, 12th Floor, Building 1, No.5 Ronghua Middle Road, Beijing Economic and Technological Development Zone, Beijing
Product Categories
- Single wire and cable vertical combustion tester
- Glass ball impact testing machine
- Air leakage detector for fresh air system
- Thermal on-site testing of building wall enclosure structure
- Heat transfer coefficient of enclosure structure
- Coating thickness gauge
- Fully automatic hollow glass dew point meter
- Air duct leakage detection equipment
- Ultrasonic flaw detector standard test block
- Steel structure anti slip coefficient detector
- Measurement of heat transfer coefficient for doors and windows
- All glass impact testing machine for hail bags
Beijing Qianli Technology Co., Ltd
Vertical burning tester for wires and cables
NegotiableUpdate on 01/08
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The wire and cable vertical combustion tester is suitable for research, production, and quality inspection departments of lighting equipment, low-voltage appliances, household appliances, machine tool appliances, motors, power tools, electronic instruments, electrical instruments, electrical connectors and auxiliary components, electrical and electronic products, and their component parts.
Product Details
[Wire and Cable Vertical Combustion Tester] Product Description:
Vertical burning tester for wires and cablesSuitable for research, production, and quality inspection departments of lighting equipment, low-voltage appliances, household appliances, machine tool appliances, motors, power tools, electronic instruments, electrical instruments, electrical connectors and accessories, electrical and electronic products, and their component parts.
The testing instrument adopts the recommended product structure for the air mixture structure in GB18380.12-2008, and the details also meet the acceptance requirements of the quality inspection unit. Standard: GB/T18380.1-2008、GB/T18380.11-2008、GB/T18380.12-2008、GB/T18380.21-2008、GB/T18380.22-2008、GB/T19666-2005、GB12972、GB3003、IEC60332、MT818、MT386、ISO5656
The vertical combustion tester for wires and cables uses a specified size of Bunsen burner and a specific gas source (propane) to apply flame to a vertical specimen at a certain flame height and a first-class flame angle. The combustibility and ignition hazard of the specimen are evaluated based on the ignition, duration, and length of combustion.
Technical Specifications
Color screen controller: automatically records test time, automatically displays results, automatically counts time, automatically ignites, automatically returns to the original position, and can choose whether to turn off the gas.
Burner: Inner diameter Φ 9.5mm ± 0.5mm
Test angle: The horizontal beam of the specimen can be moved at a 45 ° angle, and the position of the local lamp can be adjusted according to the thickness of the specimen
Flame height: adjustable from 20mm ± 2mm to 190 ± 1mm
Flame application time: adjustable from 0 to 999.9s ± 0.1s
Combustion gas: 95% high-purity propane gas (usually replaced by liquefied gas)
Environmental temperature: 23 ℃± 10 ℃
Test piece length: 600mm ± 25mm
Test piece diameter: should be greater than 0.8mm
Combustion burner power: 1kw
Voltage: 220V/50Hz
Gas flow rate: 0-1L/min
Air flow rate: 1.5-15L/min
Dimensions: 60cm × 45cm × 156cm
Standard recommends two flame calibration methods
Flame inner flame 50-60mm, outer flame 170-190mm
The time for heating 10g copper head from 100 ℃ to 700 ℃ is 45s ± 5s
Similar Product Recommend
