-
E-mail
liuqin02@foxmail.com
-
Phone
18038227030
-
Address
Room 2402, No. 53 Wanbu Road, Changping Town, Dongguan City, Guangdong Province
Product Categories
- High and low temperature damp heat test chamber
- Rain test chamber
- Rapid temperature and humidity test chamber
- UV aging test equipment
- Sand and dust testing equipment
- Walk in high and low temperature laboratory
- Thermal Shock Chamber
- high-low temperature chamber
- Humidity testing equipment
- salt spray test chamber
- Xenon lamp aging chamber
Dongguan Liuqin Testing Instrument Co., Ltd
Cold and hot shock environment testing equipment
NegotiableUpdate on 02/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The cold and hot shock environment testing equipment and the high and low temperature shock testing machine are the same type, same function, and same design testing machines. As some customers use the low temperature shock testing function more than the high temperature shock testing during testing, they call it a low temperature shock testing machine or a low temperature shock testing machine, or it can be shortened to an impact testing machine.
Product Details
Cold and hot shock environment testing equipmentIt is a testing machine with the same function and design as the high and low temperature impact testing machine. Due to some customers using low temperature impact testing more than high temperature impact testing during testing, they call it a low temperature impact testing machine or a low temperature impact testing machine, or it can be shortened to an impact testing machine.
This testing machine is mainly used for adaptability testing of industrial electricians, electrical appliances, electronics and other finished or semi-finished products under low-temperature climate conditions, such as impact from minus 10 degrees to minus 20 degrees or minus 40 degrees, and even lower can reach minus 55 degrees or minus 65 degrees. To be precise, it should be able to conduct impact tests at any temperature range between minus 65 degrees Celsius and 150 degrees Celsius. Why does high temperature occur in this range? However, it is only called a low-temperature impact testing machine because the cost of high-temperature systems is not high for manufacturers. Therefore, in situations where customers do not refuse, it is generally matched to customers. This will give industrial products more impact range, and the physical and other related properties of industrial products can be tested more realistically. After testing with this testing machine, the results can determine whether the product's performance can meet the expected requirements, so as to provide quality improvement, structural design, performance testing, and factory inspection for industrial products.
Liuqin styleCold and hot shock environment testing equipment|Low temperature impact testing machine | The impact testing machine comes standard with various protection systems: high laboratory temperature, residual current circuit breaker, low protection (built-in controller), high and low temperature chamber over temperature protection (built-in controller), compressor over pressure, over temperature protection, water cut-off relay protection, fan thermal relay protection, motor temperature switch protection, motor reverse prevention relay protection, compressed air pressure switch protection, fuse protection, external alarm terminal protection (contact capacity: AC 250V 2AB).
