Complete Dawn Hydraulic Filter Cartridge Models Hydraulic Filters

Dawn Hydraulic Filter Element Model - Dawn Hydraulic FilterThis series of high-pressure oil filter cartridges are installed in the hydraulic system's oil circuit to remove metal powder and other mechanical impurities from the wear of various components in the hydraulic system, keeping the oil circuit clean and extending the service life of the hydraulic system. The low-pressure series filter element is also equipped with a bypass valve. When the filter element is not replaced in time, the bypass valve can automatically open to ensure the normal operation of the system.

Dawn Hydraulic Filter Element Model - Dawn Hydraulic FilterDawn hydraulic oil filter element, manufacturer of Dawn hydraulic oil filter element, quotation, Tongcheng Filter Factory, (Guo Xin) product *, manufacturer of Dawn filter element.
The high flow stainless steel filter element filter medium adopts non-woven fabric technology platform and polypropylene melt blown material. Loose fibrous tissue, high altitude
The increase in porosity increases the capacity for impurities and has a deep three-dimensional filtration effect. It belongs to the complex deep interception, where larger particle impurities are intercepted on the fiber surface, while fine particles are captured in the deep layers of the filter material. Therefore, the filtration efficiency of the filter element has a gradient filtration effect
Horizontal pleating design and technology: As the core filtration unit of the high flow filtration system, the high flow filter element adopts the horizontal pleating technology, which enlarges the area of the filter medium in a limited space. At the same time, the folding technology ensures that fluid passes through each unit area of the filter element,
Ensure that the filter medium area is converted to the effective filter area.
1 micron, 5 microns, 10 microns, 15 microns, 20 microns, 25 microns, 30 microns, 40 microns, 50 microns and other levels
Application areas of water filter cartridges:
Oil filtration, chemical raw materials, organic solution filtration, electroplating solution filtration, various water treatments, reverse osmosis pre filtration, electronic industry operating conditions: operating temperature: folding polypropylene: 82C; melt blown polypropylene: 65C
Pressure drop: Foldable polypropylene: 3.4 bar, 82C
Melt blown polypropylene: 1.03 bar, 65C
Recommended pressure drop for filter replacement: 2.4bar, 20C
Suggested large water flow rate: 20 inch long filter element: 660LPM
40inch long filter element: 1300LPM
60inch long filter element: 1900LPM
When selecting an oil filter for a Pall filter cartridge, the following points should be considered:
1. The filtering accuracy should meet the predetermined requirements,
2. Able to maintain sufficient flow capacity for a long period of time;
3. The filter element has sufficient strength and is not damaged by hydraulic pressure;
4. The filter element has good corrosion resistance and can work continuously at the specified temperature;
5. The filter element is easy to clean or replace.