DCFH-80L-AC battery testing protective box

nameTitle: Battery Test Protective Box

typenumber:DCFH-ACseries
productCard:one three seven

Product scope of application:

A battery protection box is a protective device designed specifically for battery safety testing. Its main purpose is to effectively isolate and control potential hazards such as combustion and explosion that may occur during overcharging, overdischarging, forced discharge, and other safety performance tests of batteries, thereby protecting the safety of operators, equipment, and the surrounding environment. It adopts multiple safety designs such as sturdy steel structure, explosion-proof chain, explosion-proof observation window, pressure release device, smoke exhaust system, and intelligent monitoring to ensure safety in extreme situations-Reduce risk to a low level under end testing conditions.

Structure characteristics of DCFH-AC series battery testing protective box:

1. Outer box: Comes with standard cable testing holes, 2 on the left side.

The box is made of carefully selected cold-rolled thickened steel plate substrate, treated with electrostatic baking paint process, forming a dense protective layer on the surface, which is hard and firm, and has extremely-Strong rust prevention ability.

2. Protective door: The box door adopts reinforced hinges and is equipped with explosion-proof chains.

3. Pressure relief device: The top of the box is equipped with a dedicated pressure relief port.

4. Studio: The inner liner is made of SUS304 stainless steel material and polished with a mirror finish.

5. Shelf: A partition used to hold batteries, manufactured using special techniques based on the characteristics of the battery, and easy to use.

6. Explosion proof observation: Double layered hollow tempered steel observation window, equipped with steel wire mesh to protect against explosion impact.

7. Control panel: Equipped with a microcomputer intelligent LCD temperature controller, it has high accuracy, no overshoot, multiple sets of data displayed on one screen, temperature correction function, and timing function.

8. Temperature control: Equipped with automatic cold and hot control function, equipped with high-sensitivity sensors to ensure stable continuous operation.

9. Air duct: A dual duct forced convection ventilation structure improves temperature response speed, enhances temperature uniformity, and minimizes temperature fluctuations.

10. Alarm system: If there is smoke or fire inside during the experiment, the system will sound and light an alarm, and automatically power off.

11. Safety system: leakage protection, auxiliary temperature control, equipped with RS485 communication interface.

DCFH-AC series battery testing protective boxProduct Parameters：