DELACHAUX collector red 45340

NegotiableUpdate on 03/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

DELACHAUX collector red 45340 is installed at any point on the sliding wire, and its characteristics are the same as those of the standard interface. It forms a 10mm long disconnect between two adjacent sliding wires through an air gap

Product Details

DELACHAUX collector red 45340

Triple type safety sliding contact line

interface	SDZHG630A/800A	SDZHG1000A/1250A
Part number:	346114	346101
Weight (kg):	0．700	1．230

Interface ① is an aluminum profile fixed to the upper part of the conductor of the sliding wire with bolts (using 4 or 6 bolts depending on the size of the sliding wire), which ensures the straightness and continuity of the conductivity between each sliding wire

Each interface is protected by an interface sheath ② and end ③ ④

Power input	SDZHG630A/800A	SDZHG1000A/1250A
Part number:	346116	346180
Weight (kg):	0．740	1．270

The aluminum power input interface ① embedded in the upper half of the conductor of the sliding wire can be connected to a 300mm2 hard cable or a 150mm2 soft cable.

Each power input interface is protected by an interface sheath ② and an end cap ③, with a protective gasket ④ on the end cap. The size of the hole can be adjusted according to the diameter of the incoming cable.

Hanging clip
Part number:	345045
Weight (kg):	0．110

A single pole suspension clip made of insulating material ① is used to suspend and support sliding wires. It can be installed at any point on the sliding wire. The central bolt ② on the suspension clip can ensure a 360 degree rotation and can only withstand expansion

The center to center distance for positioning between each sliding wire is 130mm or 50mm

The support spacing between each hanging clip is 3 meters

fixed clip
Part number:	349045
Weight (kg):	0．020

Fixed clip ① is installed on both sides of a hanging clip located in the system *, or on both sides of a hanging clip between two expansion components (optional)

Terminal sheath
Part number:	349113
Weight (kg):	0．130

At the terminal of the sliding wire, there is a * edge sheath ① that is forcefully fitted, which can protect the terminal of the system

current collector	SDZHG250A	SDZHG2x250A
Part number:	345801	345807
Weight (kg):	3．500	7．000

The current collector ① allows for significant movement in both horizontal and vertical directions, and is equipped with one or two graphite copper contact shoes ② to ensure current collection. The contact shoes are mounted in the edge bracket ③ to prevent any contact with live parts. Additionally, the insulating bracket may provide good guidance for the current collector to run along the contact surface,

-Horizontal movement:+/-50mm

-Vertical movement:+/-50mm

-Maximum speed: 200m/min

-Highest ambient temperature:+80 ℃

-Lowest ambient temperature: -20 ℃

-Cross section of connecting cable: 2 × 35mm2 per contact shoe

-Length of connecting cable: 1.700 meters

Collector support bracket
Part number:	310991
Weight (kg):	0．750

A galvanized support frame ① is fixed on the mobile device, and a 250 ampere current collector or a 2 × 250 ampere current collector is installed on this support frame.

High temperature resistant current collector 45340

DELACHAUX collector red 45340

Isolation interface	SDZHG630A/800A	SDZHG1000A/1250A
Part number:	346178	346181
Weight (kg):	0．660	0．110

The appearance of isolation interface ① is similar to that of the standard interface, and its characteristics are the same as those of the standard interface. It forms a 10mm long disconnect between two adjacent sliding wires through an air gap

Each isolation interface is protected by an interface sheath ② and an end cap ③