DHF44 Drawing Zhaoqing DHF44 Parameters Dehui Special Fan

Models 9-19 and 9-26 series high pressure, commonly used in forging furnaces and high-pressure forced ventilation, are widely used for conveying air and other non self igniting, harmless to human health, and non corrosive gases to steel materials. Its body does not contain viscous substances, and the dust and hard particles it contains do not exceed 150mg/m ³. The gas temperature should not exceed 80 ℃.

The casing is made into two different types. A type of casing as a whole cannot be disassembled. A type of casing is made in three parts, divided into two halves along the horizontal plane of the center, and the upper half is further divided into two halves vertically along the centerline, connected by bolts.

The models 9-19 and 9-26 series can be made into two types: right rotation and left rotation. When viewed from the side of the motor and the impeller rotates clockwise, it is called a right cyclone machine, represented by "right"; The counterclockwise rotation of the impeller is called a left cyclone, represented by "left"

The outlet position of the fan is represented by the angle of the fan outlet. Both "left" and "right" can be made into 6 angles: 0 °, 45 °, 90 °, 135 °, 180 °, and 225 °. (Please rotate and adjust the angle of the air outlet when placing an order, the angle needs to be customized).
The transmission modes of the fan are A (4 # -6.3 #) and D (7.1 # -16 #).