DPM 48/96-20000 Digital Display Meter DPM 24/96-10000

DPM 48/96-20000 Digital Display Meter DPM 24/96-10000The model

DIGEM 96x48 MF5、DIGEM 96x48 MB5、Electronic Panel Meters、

DIGEM 96x48 SN5、DIGEM 96x48 CK5、Digital Panel Meters & Counters、

German GMW GOSSEN MULLER&WEIGERT digital display DPM 48/96-20000, DPM 24/96-10000

1. Before use, the instrument needs to be powered on for 15 minutes.

2. Be careful to prevent vibration and impact, and do not use in places with excessive dust and harmful gases.

3. The input wire should not be too long. If the input end of the tested signal is too long, please try using twisted pair shielded wire.

4. If the signal is accompanied by high-frequency interference, a low-frequency filter should be tested online.

5. When stored unused for a long time, please power on for at least 4 hours every three months.

6. Long term storage should avoid direct sunlight and be stored at an ambient temperature of -25 ° C~55 ° C

7. If the instrument does not display, the auxiliary power supply should be checked first to ensure that the voltage is within the range.

8. If the display is abnormal, check if the input signal is normal and if the signal terminals are tightened.

DPM 48/96-20000 Digital Display Meter DPM 24/96-10000application

The GMW GOSSEN MULLER&WEIGERT digital ammeter is an electronic instrument that uses digital display technology to measure current. It belongs to the category of electrical measuring instruments and is widely used in industrial automation, power system monitoring, intelligent buildings, and household electricity management. The device converts the current signal into a digital quantity through internal sensors, and after processing by the CPU, displays the measured value on an LED or LCD screen, supporting AC circuit measurement.