Welcome Customer !

Membership

Help

Qingdao Dasen Environmental Protection Equipment Co., Ltd
Custom manufacturer

Main Products:

hbzhan>Products

Qingdao Dasen Environmental Protection Equipment Co., Ltd

  • E-mail

    dasenhuanbao@163.com

  • Phone

    1561055873115610558732

  • Address

    No. 2 Yuantou Road, Licang District, Qingdao City

Contact Now

Delger water vapor detection tube

NegotiableUpdate on 02/10
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
The Delger water vapor detection tube is a specialized water detection consumable for Delger compressed air quality testing dew point meters. It is simple and economical, and can replace dew point meters for GMP certified compressed air dew point testing. Delger water detection tubes come in two specifications: 8103061 (20-1500mg/m3) and 6728531 (2-450mg/m3).
Product Details

Product Introduction:

The Delger water vapor detection tube is a specialized water detection consumable for Delger compressed air quality testing dew point meters. It is simple and economical, and can replace dew point meters for GMP certified compressed air dew point testing. Delger water detection tubes come in two specifications: 8103061 (20-1500mg/m3) and 6728531 (2-450mg/m3).

Delger water vapor detection tubeMainly detects the water content in compressed air, which can be converted into dew point value and replace dew point meter. At present, there are two main specifications of Delger water detection tubes. The Water Vapour 20/a-P (for HP/alpha) with order number 8103061 has a range of 20-1500mg/m ³, while the Water Vapour 5/a-P (for CO2) with order number 6728531 has a range of 2-450 mg/m3. Delger water detection tubes generally need to be used in conjunction with Delger compressed air quality detectors, and can also be equipped with Delger oil detection boxes, CO detection tubes, and CO2 detection tubes to detect the oil content, CO content, and CO2 content in compressed air.

Water detection tube 8103061 Product introduction:

The Water Vapor 20/a-P detection tube requires special handling!

Break the end of the detection tube pointed by the arrow, and only scratch the end away from the arrow

• Open the compressed air source

Insert the end pointed by the arrow into the "H2O" detection channel

Cut off the end that deviates from the arrow and insert it into the detection channel

• Start timing

Please be careful not to inhale the gas expelled from the system!

Dew point description for water detection tube 8103061:

The range of Delger water vapor detection tube 8103061 is 20-1500mg/m ³, corresponding to a dew point of -76 to 13 º Ctd. Suitable for low dew point measurement, suitable for GMP certification requirements -40 º Ctd use, with a maximum detection time of 10 minutes. The measured value is the humidity value, and the dew point value measured by the gas point from the same pipeline is the same. It does not require a power supply and can also be used in explosion-proof spaces.

The Delger 6728531 water detection tube has a small range and is strictly not suitable for detecting dew points, as it has a small range and is suitable for enterprises with low water content and high requirements.