Desulfurization and denitrification Roots blower

Firstly, standard operation of the desulfurization Roots blower is essential. Before starting the machine, please open the manual exhaust valve of the desulfurization Roots blower to prevent any impact on the blower. Please close the exhaust valve before shutting down. Then press it again. This can be used during normal operation to extend the lifespan of the fan.

The operation of the Roots blower for desulfurization and dust removal requires the installation of an air filter to prevent impurities particles from being sucked into the rotating fan in the air and increasing wear on the components. However, after using the Roots blower for a period of time to clean the filter mesh, a large amount of impurities will precipitate, resulting in a decrease in fan pressure and flow rate. Therefore, you need to slice it in a timely manner in order to continue using the clean filter.

If the surface of the Roots fan filter is found to be dirty during inspection, washing should be chosen for cleaning. However, in order to achieve satisfactory results, the filter cotton cleaning of the filter has also been changed, and the washing and filtering effects of the Roots fan filter cotton cannot be achieved; If the surface of the filter is not dirty, the method of blowing clean air on both sides can be used to clean the dust and light visible to the eyes.

If the desulfurization Roots blower malfunctions and needs to be shut down for maintenance or a new machine needs to be purchased, professional technicians are needed to assemble it. Some people think it may be easy to install and assemble it themselves by referring to the instructions. Everyone should know that this method is very wrong. The desulfurization Roots blower must be assembled by professionals. Because there are many technical points and key parameters that we do not understand, we cannot master.