Deviation sensor

1、 Product Introduction

The GEJ30 deviation sensor is an intrinsically safe electrical equipment for mining. This sensor is suitable for use in underground coal mines, open-pit coal mines, coal preparation plants, and other workplaces. It is used in conjunction with the main unit of the belt conveyor protection device for detecting and protecting the deviation of the belt conveyor.

2、 Product Features

When the tape is running normally, the probe of the deviation switch is in a vertical position. When the tape deviates, the tape touches the deviated probe rod and drives the probe rod shaft to rotate. When the probe rod deflects to an appropriate angle, the travel switch inside the deviation switch is turned to emit a deviation signal.

3、 Main technical parameters

1. Contact capacity: DC12V/0.5A;

2. Output signal: normally open passive contact: 1 pair;

3. Action angle: 30 °± 3 °;

4. Reset angle: 10 °± 3 °;

5. Touch lever action force: 20N~100N;

6. The angle of rotation of the lever: ≥ 70 °;

7. Output signal: normally open passive contact: 1 pair;

8. Action performance: The sensor is subjected to action force, and when the probe rotates to the action angle, it should immediately act. The normally open contact closes, and when the action force is removed, the probe automatically returns to its original position. When the reset angle is reached, it immediately recovers, and the normally open contact opens.