Efficient and environmentally friendly corrosion and scale inhibitor

Efficient and environmentally friendly corrosion and scale inhibitorPerformance characteristics:

1. Effectively applied to DOW Chemical Filmtec membrane components and Heidelberg reverse osmosis membrane components in the United States and certified;

2. Compatible with other organic flocculants, ST and other flocculants;

3. Suitable for water types containing high silicon, high hardness, and high alkalinity, it can effectively control and disperse the formation and deposition of silicon on the membrane surface. The concentration of SiO2 on the concentrated water side can reach 600 ppm, and it can also effectively control scaling caused by carbonates, sulfates, and phosphates, and has strong dispersibility for metal oxides;

4. Suitable for all major reverse osmosis membranes.

5. Colorless to pale yellow liquid

6、Density (20 ℃)：1.20+0.05 g/cm3

7、pH(1.0)：1.0-3.0

8. Solubility: * soluble in water

9. Dosing box: An anti-corrosion dosing box is required, and anti-corrosion materials mainly include PVC, fiberglass, HDPE, etc.

10. Dosing point: Add before Mixer or Cartridge Filters.

11. Dosage: It is determined based on the quality of the feedwater, the type of membrane, and system operating parameters such as recovery rate, temperature, and pressure. The general dosage is

12. 25kg/drum original sealed, stored in a cool place;

13. Shelf life: Three years;

Efficient and environmentally friendly corrosion and scale inhibitorDilution ratio: It can be diluted or added as the original solution. To ensure the accuracy of dosing, dilution is generally used. The dilution water is RO produced water or mixed bed effluent, and the recommended dilution ratio is not more than 10 times. Re prepare the medicine every 5-7 days, and be sure to clean the medicine box before re preparing to prevent the growth of microorganisms.