Electric soft seal gate valve Z945X-10 DN500

1Electric soft seal gate valve Z945X-10 DN500salesfeature:

For a long time, the general gate valves used in the market have generally suffered from water leakage or rusting. Our company has introduced European high-tech rubber and valve manufacturing technology to produce elastic seat seal gate valves, which overcome the defects of poor sealing and rusting of general gate valves. The elastic seat seal gate valve uses the compensating effect of slight elastic deformation generated by the elastic gate plate to achieve good sealing effect. This valve has significant advantages such as lightweight opening and closing, reliable sealing, good elastic memory, and service life.

IIsalesMain component materials：

IIIGate valve salesparameter

Product Name: Electric Elastic Seat Sealing Gate Valve

Product model: Z945X

Product caliber: DN40-1200MM

Work pressure: PN1.0/1.6/2.5Mpa

Applicable medium temperature: 0-80 ℃

Applicable MediumoccasionTap water, sewage, construction, petroleum, chemical, food, medicine, textile, electricityWait.

4Electric soft seal gate valve Z945X-10 DN500salesNotes:
Before installation, it is necessary to check whether the product model, part number, and specifications match, and whether the parts of the whole machine are damaged or loose. The pipeline should be cleaned, and there should be sufficient straight pipe sections and filters at the valve inlet. The flange connection between the valve body and the pipeline should pay attention to coaxiality. Before installing the shut-off valve, the pipeline should be cleaned first. The installation site should consider the safety of personnel and equipment, which is both convenient for operation and conducive to disassembly and maintenance. Valves should be installed upright and vertically on horizontal pipelines. If necessary, they can be installed at an angle. Horizontal installation should be avoided as much as possible. In situations where the valve has a large self weight or vibration, a support frame should be used. The direction of medium flow should be aligned with the arrow on the valve body pointing towards *. The gas source should be dry and oil-free. Valves should be used in environments with temperatures ranging from -20 to 55 ℃. For cleaning general media, simply rinse with water. But for cleaning media that are harmful to health, it is necessary to first understand their properties and then choose the appropriate cleaning method.
Remove rust from exposed parts first, but before removing rust, protect the machined surfaces of precision parts such as valve seats, valve cores, valve stems, and push rods. Tools should be used when disassembling and assembling valve seats. The sealing surface has small rust spots and wear, which can be machined. If the damage is severe, it must be replaced. But regardless of whether the hard sealing surface is repaired or replaced, it must be ground. Surface damage, can only be replaced. Damage to push rod, guide and sealing surfaces: The reaction actuator must be replaced, while the positive actuator can be repaired appropriately before use.Compression spring: If there are defects such as cracks that affect strength, it must be replaced. All vulnerable parts should be replaced with new ones during each maintenance. Valve assembly should pay attention to alignment, bolts should be tightened diagonally, and lubricating oil should be added to the sliding parts. After assembly, the product should be debugged according to the factory testing items and methods,